For: Puch · Sachs · Zündapp Belmondo

31175

swiing® ingenious EVO racing ignition 12 V with light 60 W

281,70 EUR

Incl. VAT, plus shipping costs

in stock

Item not in stock, we will take care of it!

The swiing® ingenious EVO racing ignition with light (12 Volt & 60 Watt) is suitable for left- and right-turning engines with 1:5 flywheel cone & 90 mm center plates.

The following special features characterize this ignition:

  • From the factory more flywheel mass than HPI ignitions, thus smoother engine idling (382 grams)
  • Finely balanced flywheel for less vibration
  • Trigger thread with normal M26x1.5 mm pitch, so normal Bosch/Ducati flywheel pullers can be used
  • Easy adjustment of the ignition timing
  • The stator was designed for high heat loads;designed for high heat loads, no more failures due to overheating
  • Optimized ignition curve (adjustment 12° - 14°)
  • Light voltage: 12 Volt
  • Light output: 60 Watt
  • Ø outer flywheel: 75 mm
  • Flywheel cone: ratio 1:5 (standard for Puch & Sachs crankshafts)
  • Ø outer stator plate: 90 mm

The ignition is compatible with cable starters and fan gears which also fit the HPI, you can find these in the accessories section.

Installation instructions: 

  • Right-turning engines: Set the piston to TDC, the marking on the base plate at 11 o'clock (left of the swiing logo) must match the marking on the flywheel, this achieves a timing of 2 mm before TDC.
  • Left-turning engines: Set the piston to TDC, the marking on the base plate at 13 o'clock (to the right of the swiing logo) must match the marking on the flywheel; this achieves a timing point of 2 mm before TDC.
  • Flywheel tightening torque: 37 - 39 Nm (no keyway available)
  • The CDI and ignition coil must be supplied with a good earth (grounding), otherwise they can be damaged within a short time.
  • The lighting system should also be equipped with a 12 V voltage regulator.

Correct pinning of the Superseal connector:

  • 1 = black
  • 2 = blue
  • 3 = white

Attention: The ignition components stator, rotor, CDI and ignition coil are not compatible with parts of the HPI ignition!

Exceptional product for the highest demands of the quality brand swiing®.

Details

Manufacturerswiing® ingenious parts

Suitable for the following models

Puch
Sachs
Zündapp Belmondo

Accessories & related products

Moped fans like you also bought: