External ignition coil suitable for your moped, moped and small motorcycle with swiing® ingenious EVO racing ignition.
The coil comes with screwed-in ignition cable, protective cap and the required mounting parts. The ignition cable is 7 mm thick and is pulled into a protective sleeve for additional protection.
A galvanized sheet steel bracket is provided for fastening the coil; depending on the installation location, this can be dispensed with.
Attention: The swiing® ingenious EVO ignition elements are not compatible with HPI components.
Matching flywheels, stator, CDI and the complete ignition can be found in the accessories section.
Exclusive product for the highest demands of the quality brand swiing®.
Details
Manufacturer | swiing® ingenious parts |
Color | black |
Ø cable holder | 7 mm |
Cable length | 480 mm |
Total length | 80 mm |
Height | 50 mm |
Mounting type | Nuts & bolts |
Ø mounting hole | 6.5 mm |
Hole spacing | 62 mm |
Area of application | Tuning |
Number of fixing points | 2 pcs |
Suitable for the following models
Puch | |
Sachs | |
Zündapp Belmondo |
Accessories & related products
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
10,20 EUR
swiing® ingenious EVO flywheel
Manufacturer: swiing® ingenious parts · Material: Steel · Thread type: MF26x1.5 (fine pitch thread) · Direction of rotation: any · Height: 38 mm · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 75 mm · Thread length: 9 mm · Cone length: 28 mm · Ø Internal flywheel: 63.5 mm · Cone ratio: 1:5 · Weight: 390 g
105,10 EUR
swiing® ingenious EVO stator
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Surface: anodized · Tension: 12 V · Ø inside: 28 mm · Performance: 60 W · Ø outside: 94 mm · Color: red · Number of cables: 4 pcs · Cable length: 620 mm · Cable length: 700 mm · Ø bolt circle: 80 mm · Number of fixing points: 4 pcs
128,50 EUR
Not in stock
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
11,60 EUR
25,78 EUR/l
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: angular · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Wheel size [inch]: 17 " · Mounting type: Nuts & bolts
40,80 EUR
GPO piston 41 mm (12 mm KoBo) | Puch X30 Velux fan-cooled
Manufacturer: GPO · Nominal diameter: 41 mm · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 23.2 mm · Curvature (D): 3.7 mm · Total piston height (E): 49.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Piston weight: 85 g
58,30 EUR