Original 38 mm cylinder kit with seal for your Puch X30 Velux S, L, LA moped / moped with 12 mm piston pin.
Absolutely perfect condition with no traces of storage.
The cylinder and piston are from the quality brand "ELKO".
The intake and exhaust studs are already installed.
Further add-on parts such as cylinder head, gasket set, studs etc. can be found in the accessories section. You can find them in the accessories section.
NOS – New from old stock.
Original Puch spare part number: 320.2.10.305.0
Details
Nominal diameter | 38 mm |
Manufacturer | Puch |
Material | Gray cast iron |
Surface | raw |
Displacement | 50 ccm |
Crankshaft stroke | 43 mm |
Ø cylinder neck | 44.9 mm |
Ø outlet inside | 19.4 mm |
Ø Inlet inside | 8.2 mm |
Thread inlet | M6x1 (standard thread) |
Hole spacing inlet | 32 mm |
Ø piston pin (B) | 12 mm |
Outlet type | straight |
Hole spacing outlet | 42 mm |
Number of fixing points | 4 pcs |
Thread outlet | M6x1 (standard thread) |
Hole pattern [mm] | 44 x 44 |
Decompressor | Yes |
Camouflaged | No |
Area of application | Original |
Suitable for the following models
Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
38 mm cylinder head, fan-cooled | Puch X30 NG-2AH, NG-2A, N-2A, DS, MV
Ø outside: 90 mm · Material: Aluminum · Area of application: Standard · Height: 35 mm · Ø cylinder: 38 mm · Candle thread: short · Decompressor: No · Number of fixing points: 4 pcs · Ø screw holder: 6.4 mm · Hole pattern [mm]: 44 x 44
45,00 EUR
Not in stock
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: blue · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
24,70 EUR
2 470,00 EUR/l
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Width: 14.2 mm · Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony Spare part no.: A4222 · Tomos spare part no.: 035548 · Alternative version of Sachs spare part no.: 0232 157 001
13,40 EUR
Moped fans like you also bought: