Set of galvanized M6 threaded stud bolts with increased strength and 1D nuts for the intake, exhaust or cylinder base mounting of various mopeds, mopeds and small engine bikes (Puch, Sachs, Zündapp, etc.).
These stud bolts can also be used with Sachs engines when mounting a lift plate. The original cylinder stud bolts are usually too short.
Total length: 30 mm
Thread length: 12 / 12 mm
Strength of stud bolt: 10.9
Strength nut: 8
Material: Steel, galvanized
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | blue galvanized |
| Diameter | 6 mm |
| Drive | External hexagon |
| Thread type | M6x1 (standard thread) |
| Width across flats SW | 10 mm |
| Total length | 30 mm |
| Strength class | 10.9, 8 |
| Thread length | 12 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Area of application: Chemistry · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
24,70 EUR
2 470,00 EUR/l
swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Total length: 38 mm · Thread length: 11 mm · Thread length: 19 mm · Strength class: 10.9
2,25 EUR
swiing stud bolt set M6 / M5 Sachs (12.9 strength) Special
Manufacturer: swiing · Material: Steel · Surface: blue galvanized · Surface: burnished · Diameter: 6 mm · Drive: External hexagon · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Width across flats SW: 8 mm · Total length: 27.3 mm · Thread length: 9.5 mm · Thread length: 14 mm · Strength class: 10 · Strength class: 12.9
21,60 EUR
Moped fans like you also bought:
Meteor piston 38 mm #1 | Puch
Manufacturer: Meteor · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.7 mm · Curvature (D): 3.3 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Tolerance group: 1 · Weight: 79 g · Puch spare part no.: 349.1.10.106.0/21
56,20 EUR
GPO piston 40 mm (12 mm KoBo) | Puch X30 Velux fan-cooled
Nominal diameter: 40 mm · Manufacturer: GPO · Ø outside piston (A): 39.94 mm · Compression height (C): 22.5 mm · Curvature (D): 3.4 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Piston ring height: 2 mm · Ø piston pin (B): 12 mm · Weight: 89 g
39,30 EUR
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø cylinder: 38 mm · Ø outlet inside: 22 mm · Area of application: Standard · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
10,00 EUR
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Hole spacing inlet: 38 mm · Area of application: Tuning · Hole spacing outlet: 42 mm · Decompressor: Yes
10,00 EUR
Piston 38 mm (12 mm KoBo) short shirt | Puch fan-cooled
Ø outside piston (A): 37.95 mm · Compression height (C): 22.9 mm · Curvature (D): 3.2 mm · Total piston height (E): 50.1 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Ø piston pin (B): 12 mm · Weight: 74 g
45,00 EUR
swiing 40 mm cylinder kit 12 mm KoBo | Puch X30 Velux, NG-2AH
Nominal diameter: 40 mm · Manufacturer: swiing · Material: Gray cast iron · Camouflaged: No · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Area of application: Tuning · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread)
180,20 EUR
swiing 38 mm cylinder kit 12 mm KoBo | Puch X30 Velux, NG-2AH
Nominal diameter: 38 mm · Manufacturer: Meteor · Manufacturer: swiing · Material: Gray cast iron · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning
146,40 EUR
Collection only possible with online purchase and appointment.
