Aluminium centring bushes, silver anodized, for clean installation of the cylinder cover on blown cylinders of your Puch X30 NG-2AH, Puch X30 NG-2A, Puch X30 N-2A, Puch DS 50, Puch MV 50, Puch MC 50 mopeds, mopeds and small motorcycles.
The bushes can be used with all 38 / 40 / 41 mm swivel cylinder heads in conjunction with M6 threaded studs.
They are pushed into the holes in the cylinder cover so that they protrude slightly above the sealing surface (see Figure 2 for illustration).
We recommend that you glue the guide bushes into the cylinder head with Loctite adhesive so that they do not move during assembly/disassembly.
Now the cylinder head can be pushed perfectly centered onto the stud bolts.
Ø inside: 6.25 mm
Ø outside: 8 mm
Length: 26 mm
Material: aluminium, anodized
Corresponding cylinder heads, stud bolts, cylinder head gaskets, Loctite, etc. can be found in the accessories section.
Made by the quality brand swiing – swiss ingenious.
Details
| Ø inside | 6.25 mm |
| Manufacturer | swiing |
| Total length | 26 mm |
| Material | Aluminum |
| Nominal diameter | 6 mm |
| Ø outside | 8 mm |
Suitable for the following models
| Puch | ZA50 (Gebläsegekühlt) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
Loctite 638 High-strength adhesive 10 ml
Manufacturer: Loctite · Temperature resistance (min.): -75 - 150 °C · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: green · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Gap dimension (max.): 0.25 mm · Type of application: 1K · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m · Area of application: Chemistry
24,70 EUR
2 470,00 EUR/l
Moped fans like you also bought:
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Hole spacing inlet: 38 mm · Number of components: 4 pcs · Hole spacing outlet: 42 mm · Area of application: Tuning · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
10,00 EUR
GPO 15 mm intake manifold | Puch (ZA50)
Manufacturer: GPO · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Hole spacing inlet: 32 - 38 mm · Height flange center hole: 52.5 mm · Total height: 63 mm · Mounting type: Screws · Total length: 51.5 mm · Number of fixing points: 2 pcs · Camouflaged: No · Area of application: Tuning
44,50 EUR
swiing® revival stud bolt set M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M6x1 (standard thread) · Diameter: 6 mm · Total length: 30 mm · Thread length: 12 mm · Drive: External hexagon · Width across flats SW: 10 mm · Strength class: 8 · Strength class: 10.9
12,00 EUR
Collection only possible with online purchase and appointment.
