Set of galvanized M6 threaded stud bolts with increased strength and 1D nuts for the intake, exhaust or cylinder base mounting of various mopeds, mopeds and small engine bikes (Puch, Sachs, Zündapp, etc.).
These stud bolts can also be used with Sachs engines when mounting a lift plate. The original cylinder stud bolts are usually too short.
Total length: 30 mm
Thread length: 12 / 12 mm
Strength of stud bolt: 10.9
Strength nut: 8
Material: Steel, galvanized
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Diameter | 6 mm |
| Thread type | M6x1 (standard thread) |
| Drive | External hexagon |
| Thread length | 12 mm |
| Width across flats SW | 10 mm |
| Strength class | 10.9, 8 |
| Total length | 30 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,80 EUR
2 580,00 EUR/l
swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Thread type: M6x1 (standard thread) · Surface: galvanized (blue) · Diameter: 5.9 mm · Thread length: 11 mm · Thread length: 19 mm · Strength class: 10.9 · Total length: 38 mm
2,35 EUR
swiing stud bolt set M6 / M5 Sachs (12.9 strength) Special
Total length: 27.3 mm · Manufacturer: swiing · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Diameter: 6 mm · Drive: External hexagon · Width across flats SW: 8 mm · Thread length: 9.5 mm · Thread length: 14 mm · Strength class: 10 · Strength class: 12.9 · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread)
22,60 EUR
Moped fans like you also bought:
Meteor piston 38 mm #1 | Puch
Manufacturer: Meteor · Ø outside piston (A): 37.95 mm · Compression height (C): 22.7 mm · Curvature (D): 3.3 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Ø piston pin (B): 12 mm · Tolerance group: 1 · Piston weight: 79 g · Puch OEM number: 349.1.10.106.0/21
58,50 EUR
GPO piston 40 mm (12 mm KoBo) | Puch X30 Velux fan-cooled
Manufacturer: GPO · Ø outside piston (A): 39.94 mm · Compression height (C): 22.5 mm · Curvature (D): 3.4 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 40 mm · Piston ring impact: Internal fuse (IS) · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring height: 1.5 mm · Piston ring height: 2 mm · Ø piston pin (B): 12 mm · Piston weight: 89 g
40,90 EUR
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Number of components: 4 pcs · Ø outlet inside: 22 mm · Ø cylinder: 38 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Hole spacing inlet: 38 mm · Area of application: Standard
10,40 EUR
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Number of components: 4 pcs · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
10,40 EUR
Piston 38 mm (12 mm KoBo) short shirt | Puch fan-cooled
Nominal diameter: 38 mm · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.9 mm · Curvature (D): 3.2 mm · Total piston height (E): 50.1 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Piston weight: 74 g
46,80 EUR
Set
Hot 
swiing 40 mm cylinder kit 12 mm KoBo | Puch X30 Velux, NG-2AH
Manufacturer: swiing · Camouflaged: No · Material: Gray cast iron · Displacement: 55 ccm · Crankshaft stroke: 43 mm · Surface: sandblasted · Nominal diameter: 40 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 32 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Area of application: Tuning · Number of fixing points: 4 pcs
187,40 EUR
swiing 38 mm cylinder kit 12 mm KoBo | Puch X30 Velux, NG-2AH
Manufacturer: Meteor · Manufacturer: swiing · Material: Gray cast iron · Camouflaged: No · Surface: sandblasted · Nominal diameter: 38 mm · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Area of application: Tuning
152,30 EUR
Collection only possible with online purchase and appointment.
