38.0 mm piston with two rectangular piston rings with internal fuse (IS) suitable for your moped / moped with 38 mm swiing cylinder kit with seal.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
Manufacturer | swiing® revival parts |
Ø outside piston (A) | 37.96 mm |
Compression height (C) | 22.6 mm |
Curvature (D) | 2.5 mm |
Total piston height (E) | 50.45 mm |
Number of piston rings (F) | 2 pcs |
Nominal diameter | 38 mm |
Piston ring mold | Rectangular ring |
Piston ring impact | Internal fuse (IS) |
Ø piston pin (B) | 12 mm |
Suitable for the following models
Puch | E50 ZA50 (Fahrtwindgekühlt) Z50 (X30 Sport) |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs
22,40 EUR
swiing® revival 38 mm original cylinder 1.6 PS | Puch
Nominal diameter: 38 mm · Manufacturer: swiing® revival parts · Material: Cast aluminum · Area of application: Standard · Camouflaged: Yes · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Ø piston pin (B): 12 mm · Hole spacing inlet: 38 mm · Ø cylinder neck: 48 mm · Ø Inlet inside: 9 mm · Ø outlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Decompressor: Yes · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Alternative version of the Puch spare part no.: 349.7.10.105.0
118,20 EUR
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Total length: 135 mm · Area of application: Standard · Material: Aluminum · Width: 125 mm · Surface: sandblasted · Ø cylinder: 38 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Height: 55 mm
37,10 EUR
swiing® revival needle roller bearing 12/15/14.2 original
Width: 14.2 mm · Bearing type: Needle sleeve · Manufacturer: swiing® revival parts · Ø inside: 12 mm · Ø outside: 15 mm · Bearing cage: Sheet steel cage · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony Spare part no.: A4222 · Tomos spare part no.: 035548 · Alternative version of Sachs spare part no.: 0232 155 001
10,00 EUR
Inner cable set automatic | Puch E50
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Total length: 1600 mm · Total length: 2200 mm · Material: Steel · Quantity: 4 pcs
11,20 EUR