Chain guard for your Zündapp Belmondo moped / moped.
The steel cover plate has been faithfully reproduced and painted. Thanks to the weld nuts, the plate is ready to install and can be mounted directly to the blower cover with two screws.
Hole spacing: 66 mm
Thread: M4
Thickness: 0.5 mm
Material: steel
Surface: painted
The chain guard plate provides a perfect finish and is a must-have for every original Belmondo restoration.
You can find more add-on parts for your Zündapp in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | varnished |
| Thread type | M4x0.7 (standard thread) |
| Color | silver |
| Total length | 99 mm |
| Height | 137 mm |
| Number of fixing points | 2 pcs |
Suitable for the following models
| Zündapp Belmondo |
Accessories & related products
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm
21,30 EUR
swiing® revival 17" rear fender Inox | Zündapp Belmondo
Manufacturer: swiing® revival parts · Color: Chrome · Material: Chrome steel (stainless steel) · Surface: polished · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Wheel size [inch]: 17 " · Total length over ends: 595 mm · Scope: 950 mm · Wide mudguard profile: 70 mm · Mounting type: Nuts & bolts · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 305 mm
90,10 EUR
swiing® revival 17" front fender Inox | Zündapp Belmondo
Manufacturer: swiing® revival parts · Color: Chrome · Material: Chrome steel (stainless steel) · Surface: polished · Folding the ends: closed folded · Shape of the mudguard: partly round · Wheel size [inch]: 17 " · Total length over ends: 525 mm · Scope: 638 mm · Wide mudguard profile: 69 mm · Mounting type: Nuts & bolts · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 157 mm
67,50 EUR
swiing® revival rear mudguard strut chrome (Version 2.0) | Zündapp Belmondo
Manufacturer: swiing® revival parts · Color: Chrome · Material: Steel · Surface: chrome-plated · Distance mudguard - center hole: 318 mm · Total length: 345 mm · Number of fixing points: 3 pcs · Ø mounting hole: 6.5 mm · Mounting type: Nuts & bolts
40,50 EUR
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs
3,15 EUR
swiing nozzle set M4 (76 - 86) Bing 18, Bing 85
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: 17 Catalyst · Carburetor type: 18 Catalyst · Carburetor type: 85 · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M4 · Nozzle size: 54 · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 86
17,90 EUR
Transval speedometer drive 17" with grease nipple
Manufacturer: Transval · Ø axle: 11 mm · Material: Aluminum · Color: gray · Thread type: MF10x1 (fine pitch thread) · 4-edge speedometer cable: 1.9 mm · Ø outside: 41 mm · Place of use: left · Place of use: right · Wheel size [inch]: 17 " · Overall width outside: 60 mm · Total height: 52 mm · Ø mounting hole: 11 mm
33,70 EUR
Collection only possible with online purchase and appointment.
