Front mudguard made of stainless steel for your Zündapp Belmondo moped / moped.
The highly polished surface ensures a first-class look and gives your moped the necessary shine.
Since the mudguard is folded on both sides, there are no sharp edges, which significantly reduces the risk of injury.
The option of using an edge protector or splash guard flap is also still available. Corresponding holes must still be drilled if required.
All original holes are available for mounting the lower and upper mudguard struts.
Shape: part-round
Width of mudguard profile (A): 70 mm
Height of mudguard profile (B): 25 mm
End: folded closed on both sides
Material: chrome steel (stainless steel), highly polished
Total height from support surface to top edge (C): 158 mm
Total length over ends (D): 525 mm
Circumference (E): 638 mm
Further parts for your wheel fairing, such as stainless steel polish or fastening material, can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (stainless steel) |
| Surface | polished |
| Color | Chrome |
| Folding the ends | closed folded |
| Shape of the mudguard | partly round |
| Total length over ends | 525 mm |
| Scope | 638 mm |
| Wide mudguard profile | 69 mm |
| Height of mudguard profile | 25 mm |
| Total height from support surface to top edge | 157 mm |
| Wheel size [inch] | 17 " |
| Mounting type | Nuts & bolts |
Suitable for the following models
| Zündapp Belmondo |
Accessories & related products
Autosol stainless steel polish 75 ml
Manufacturer: Autosol · Material to be used: Chrome steel (stainless steel) · Contents [ml]: 75 ml · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry
12,30 EUR
164,00 EUR/l
swiing® revival 17" rear fender Inox | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Total length over ends: 595 mm · Mounting type: Nuts & bolts · Scope: 950 mm · Wide mudguard profile: 70 mm · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 305 mm
90,10 EUR
swiing® revival upper front mudguard strut chrome | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 200 mm · Mounting type: Nuts & bolts · Number of fixing points: 7 pcs · Hole spacing: 20 mm · Hole spacing: 25 mm
37,60 EUR
swiing® revival lower front mudguard strut chrome (Version 2.0) | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Distance mudguard - center hole: 280 mm · Total length: 305 mm · Ø mounting hole: 6.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 3 pcs
40,50 EUR
Moped fans like you also bought:
GPO pedal cranks pair chrome | Puch
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Thread type: FG14.3 (9/16" 20G) · Crank length (center-center): 156 mm · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Wide intake: 28 mm · Total length: 180 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm
84,40 EUR
swiing® revival gasket outlet | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Graphite / Graphite · Place of use: Outlet · Total length: 5308 mm · Number of fixing points: 2 pcs · Ø mounting hole: 7.1 mm · Hole spacing: 40 mm · Thickness: 1.5 mm · Ø inside: 25 mm · Ø outside: 38.3 mm
4,40 EUR
swiing® revival pedal axle with chrome rim | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 225 mm · Wavelength from wreath: 50 mm · Wavelength from wreath: 170 mm · Ø Outer sprocket: 121 mm · Ø outside: 15.9 mm
88,40 EUR
swiing® revival 17" rear fender Inox | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Total length over ends: 595 mm · Mounting type: Nuts & bolts · Scope: 950 mm · Wide mudguard profile: 70 mm · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 305 mm
90,10 EUR
swiing® revival 17" fender set Inox | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: perforated · Color: Chrome · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Mounting type: Nuts & bolts
157,70 EUR
swiing® revival upper front mudguard strut chrome | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 200 mm · Mounting type: Nuts & bolts · Number of fixing points: 7 pcs · Hole spacing: 20 mm · Hole spacing: 25 mm
37,60 EUR
swiing® revival lower front mudguard strut chrome (Version 2.0) | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Distance mudguard - center hole: 280 mm · Total length: 305 mm · Ø mounting hole: 6.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 3 pcs
40,50 EUR
swiing® revival rear mudguard strut chrome (Version 2.0) | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Distance mudguard - center hole: 318 mm · Total length: 345 mm · Ø mounting hole: 6.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 3 pcs
40,50 EUR
Collection only possible with online purchase and appointment.
