High-quality revision kit for the Bing SRF and 17 mm Bing SRE tuning carburetor with Ø23 mm connection dimension to the intake manifold. The revision kit is suitable for Puch Maxi, Puch X30 Sport NS/NL and Puch X30 Sport NG-2AH, Sachs 503 and other mopeds & mopeds which are originally equipped with a 17 mm SRF or have been retrofitted with a 17 mm SRF tuning carburetor.
The following parts are included in the revision set:
- Float
- Float chamber sealing ring (sealing paper)
- Float needle
- Float axle
- Stand throttle screw & spring
- Start slide & choke pin (SRF)
- Float needle 39.5 mm (1 groove)
- Needle clip & intermediate disk
- Gas slide (Ø 18.5 mm) & spring
- Carburetor cover gasket (SRF)
- Clamping screw M6 x 20 mm
- Senstock 2.20 (SRF) & gasket no. 74
- Swivel connection with screw and sealing rings
Attention: This revision set is only suitable for the Bing SRF & swiing SRF tuning carburetor with 17 mm (Ø 23 mm connection), which has the äusliche optics of the SRE and the slide tower of the SRF carburetor.
Nostalgic product for the highest demands of the swiing® quality brand.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel, Plastic, Brass, Sealing carton, Sealing paper, Aluminum, Spring steel |
| Component group Carburetor | Sealing, revising |
| Surface | raw, blank |
| Color | silver, black, brown |
| Carburetor type | SRE |
| Ø Passage | 17 mm |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | |
| Zündapp Belmondo |
Accessories & related products
17 mm Bing SRF carburetor (replica)
Nominal diameter: 17 mm · Material: Aluminum · Component group Carburetor: Carburetor complete · Total length: 78 mm · Carburetor type: SRF · Width: 64 mm · Height: 117 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Ø Internal connection: 23 mm · Area of application: Tuning · Ø Air filter connection: 60 mm · Ø Air filter connection: 64 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M4x0.7 (standard thread) · Nozzle block: 2.xx · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
75,90 EUR
swiing nozzle set M3.5 (58 - 68) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Total length: 6 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle thread: M3.5x0.6 (standard thread)
18,60 EUR
17 mm carburetor set (Bing SRF replica) | Zündapp Belmondo
Nominal diameter: 16 mm · Nominal diameter: 17 mm · Component group Carburetor: Carburetor complete · Choke control: Hand choke · Carburetor type: SRF · Ø Inside entrance: 17 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Ø Output inside: 17 mm · Area of application: Tuning · Hole spacing inlet: 40 mm · Ø Air filter connection: 60 mm · Ø Internal connection: 23 mm · Ø fuel hose connection: 6 mm
128,50 EUR
Bing "19 mm" SRF carburetor
Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Nominal diameter: 17 mm · Mounting type: Plug connection clamped · Ø Internal connection: 23 mm · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Ø Air filter connection: 60.2 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M4x0.7 (standard thread)
99,30 EUR
Hot 
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Material: Aluminum · Surface: raw · Carburetor type: SRE · Nominal diameter: 17 mm · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 65 mm · Height: 89 mm · Height: 109 mm · Width: 47 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Mounting type: Plug connection clamped · Area of application: Tuning · Nozzle block: 2.2 · Camouflaged: Yes · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
140,20 EUR
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503 AAL, 2AL/2BL, ABL, AB, AC, ADV
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Material: Aluminum · Surface: raw · Carburetor type: SRE · Nominal diameter: 17 mm · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 64.8 mm · Height: 89 mm · Height: 110 mm · Width: 47 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Mounting type: Plug connection clamped · Area of application: Tuning · Nozzle block: 2.2 · Camouflaged: Yes · Clamping screw torque (max.): 3 N/m
140,20 EUR
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503, Puch Velux
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Surface: blank · Area of application: Tuning · Nominal diameter: 17 mm · Carburetor type: SRF · Choke control: Hand choke · Nozzle block: 2.2 · Width: 47 mm · Total length: 61.5 mm · Height: 89 mm · Height: 112 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 23 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
140,20 EUR
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
11,60 EUR
25,78 EUR/l
Union pedals plastic sport black
Manufacturer: Union · Material: Plastic · Material: Steel · Color: black · Surface: rubberized · Color: silver · Thread type: FG14.3 (9/16" 20G) · Drive: Hexagon socket · Drive: Outer edge · Total length: 130 mm · Width: 76 mm · Height: 30 mm · Reflectors: Yes · Width across flats SW: 15 mm
16,30 EUR
Hot
swiing® ingenious 15 mm intake manifold camouflaged (Version 2.0) | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 15 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Area of application: Tuning · Number of fixing points: 2 pcs · Total height: 53 mm · Height flange center hole: 43 mm · Total length: 46 mm · Camouflaged: Yes
40,80 EUR
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Material: Aluminum · Surface: raw · Carburetor type: SRE · Nominal diameter: 17 mm · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 65 mm · Height: 89 mm · Height: 109 mm · Width: 47 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Mounting type: Plug connection clamped · Area of application: Tuning · Nozzle block: 2.2 · Camouflaged: Yes · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
140,20 EUR
Hot
GPO 45 mm cylinder head Racing high-compression | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Area of application: Tuning · Ø cylinder: 45 mm · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Candle thread: short · Number of fixing points: 4 pcs · Ø screw holder: 7.4 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No
58,30 EUR
Collection only possible with online purchase and appointment.
