Solid clutch puller for the original clutch and clutches with corresponding hole spacing on your Puch Maxi moped / moped and others with E50 engine.
The clutch pack is screwed on cleanly with the black screws. The large, galvanized screw can then be used to apply pressure to the crankshaft to lift the clutch.
The matching, red anodized cover should always be used to protect the KW stub.
Attention: The tool only fits the original clutch and replacement clutches from Surflex.
Clutch hole spacing: 32 mm
Clutch thread: M6
Ø inner shaft cover: 12.1 mm
You can find the corresponding clutch and other special tools for the E50 engine in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Original Puch spare part number: 905.6.34.109.0
Details
| Manufacturer | swiing |
| Area of application | (Dis)assembly tool |
Suitable for the following models
| Puch | E50 |
Accessories & related products
HK Clutch "Racing" | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Chrome steel (stainless steel) · Number of springs: 3 pcs · Recording type: Cone mounting · Number of jaws: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
338,00 EUR
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
9,85 EUR
Clutch 3-jaw (aluminum) | Puch E50
Material: Aluminum · Material: Steel · Material addition: Composite materials · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.9 mm · Area of application: Original · Area of application: Standard
56,20 EUR
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Width across flats Screw: 19 mm · Total length: 55 mm · Total length: 75 mm · Number of components: 1 pcs · Strength class: 8.8 · Area of application: (Dis)assembly tool
11,20 EUR
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: galvanized (blue) · Ø inside: 9 mm · Ø outside: 14 mm · Total length: 122 mm
3,05 EUR
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm · Number of components: 1 pcs · Area of application: Standard
3,15 EUR
Karcoma fuel filter plastic small
Manufacturer: Karcoma · Material: Plastic · Filter type: Plastic net · demountable: No · Ø inside: 3 mm · Ø outside: 20 mm · Total length: 23.4 mm · Total length: 50 mm · Ø fuel hose connection: 4.9 mm · Ø fuel hose connection: 6 mm · Color: transparent · Color: white
6,55 EUR
Oil seal NBR 17/40/7 A DUO | Puch E50
Manufacturer: Puch · Simmering type: A DUO - With rubberized outer casing / two sealing lips. · Ø inside: 17 mm · Ø outside: 40 mm · Material: NBR · Surface: rubberized · Temperature resistance (min.): -30 - 100 °C · Width: 7 mm · Area of application: Standard
5,75 EUR
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 1 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch spare part no.: 349.1.10.349.1
4,40 EUR
Collection only possible with online purchase and appointment.
