Three-jaw centrifugal clutch made of aluminum suitable for Puch Maxi mopeds with E50 engine.
The centrifugal clutch has 3 jaws made of aluminum. This results in the clutch engagement point being slightly higher in some cases.
We recommend using the clutch up to a maximum of 50 cc.
Reproduction clutch with lightweight aluminum jaws.
Details
| Ø inside | 12 mm, 14.6 mm |
| Area of application | Standard, Original |
| Material | Steel, Aluminum |
| Material addition | Composite materials |
| Number of springs | 3 pcs |
| Recording type | Cone mounting |
| Thickness | 20.9 mm |
| Number of jaws | 3 pcs |
| Ø outside | 93 mm |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Total length: 28 mm · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Material: Spring steel · Area of application: Tuning · Color: blue · Surface: coated · Number of components: 3 pcs
20,20 EUR
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Oil type: ATF Dextron 3 (DEXIII) · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,20 EUR
24,89 EUR/l
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Manufacturer: swiing® revival parts · Ø inside: 106 mm · Ø outside: 116 mm · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 0.35 mm · Number of fixing points: 4 pcs · Puch spare part no.: 349.1.10.349.1
2,70 EUR
swiing clutch springs reinforced (+50%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø inside: 4.3 mm · Ø wire: 2 mm · Ø outside: 8.45 mm · Manufacturer: swiing · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: red · Total length: 26.6 mm · Number of components: 3 pcs
20,20 EUR
25,80 EUR
swiing clutch springs reinforced (+60%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Total length: 26.9 mm · Ø wire: 2.05 mm · Manufacturer: swiing · Ø inside: 4.3 mm · Ø outside: 8.45 mm · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: yellow · Number of components: 3 pcs
20,20 EUR
25,80 EUR
Moped fans like you also bought:
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 32 - 38 mm · Area of application: Standard
11,20 EUR
Not in stock
Oil filler plug with sealing ring | Puch Maxi
Material: Steel · Surface: blue galvanized · Thread type: M10x1.5 (standard thread) · Drive: Slot · Total length: 14.6 mm · Screw head: Lens head · Ø External head: 14 mm · Thread length: 6 mm · Number of components: 2 pcs · Puch spare part no.: 364.1.10.660.1
3,95 EUR
Not in stock
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Oil type: ATF Dextron 3 (DEXIII) · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,20 EUR
24,89 EUR/l
swiing® revival set stud bolts M6 x 106 mm | Puch
Diameter: 5.9 mm · Total length: 106 mm · Width across flats SW: 10 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: M6x1 (standard thread) · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch spare part no.: 360.1.10.034.1
8,35 EUR
Collection only possible with online purchase and appointment.
