Internal rotor magnetic connection for anticlockwise and clockwise rotating motors.
The electronic ignition is supplied with the base plate from swiing and is therefore suitable for all Puch mopeds such as Maxi S / N with E50 or ZA50 engine, X30 Sport NS / NL (Z50), X30 Sport N-2AH, Supermaxi LG1 / LG2, Velux X30, X30 Racing NG-2AH without any modifications.
Also suitable for all Sachs 502, 50/2, 50/3, 50/4 & 503 engines, as well as Zündapp Belmondo 247 engines.
For the fan-cooled engines, it should be noted that a transition piece must be made from the rotor to the impeller.
This racing ignition is ideal for tuned mopeds.
With integrated speed controller: If the blue cable of the CDI is connected to ground, the speed is throttled to 5000 rpm. Depending on the gear ratio, this corresponds to a speed of approx. 25-35 km/h
Rotor weight: 268 grams
For the basic setting of the ignition, the marking on the pole wheel must match the corresponding marking on the stator when the piston is at TDC.
The installation of a 12 volt voltage regulator is essential, you will find this in the accessories section.
Legendary wiring:
- Stator cable red/black: CDI cable red/black
- Stator cable yellow/green: Ground (bare spot on frame or motor housing)
- Cable stator yellow: Light (unregulated) 0-25V
- Cable stator white: Charging current (unregulated) 0-25V
- Cable CDI orange: Zünd coil
- Cable CDI white-black: Switch-off button (if the cable is connected to ground, the ignition is interrupted)
- Cable CDI black: (connect to ground on ignition coil)
- Cable CDI red/black: Stator
- Cable CDI blue: Speed control, e.g. on switch as on accessories
- .e.g. on switch as listed in the accessories (if the cable is connected to ground, the speed is limited)
Quality product from the Spanish manufacturer MVT Allumage.
The set includes the following fixed parts:
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø outside: 90 mm · Area of application: Tuning
Manufacturer: MVT Allumage · Tension: 12 V · Performance: 65 W · Direction of rotation: left, right · Ø mounting plate: 94 mm · Ø Flywheel outside: 49.2 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Weight: 268 g · Area of application: Tuning
Details
| Manufacturer | MVT Allumage, swiing |
| Tension | 12 V |
| Performance | 65 W |
| Direction of rotation | left |
| Ø mounting plate | 96 mm |
| Ø Flywheel outside | 49.2 mm |
| Ø cable | 7 mm |
| Weight | 268 g |
| Area of application | Tuning |
| Number of fixing points | 2 pcs |
| Mounting type | Screws |
Suitable for the following models
| Puch | E50 ZA50 (Fahrtwindgekühlt) ZA50 (Gebläsegekühlt) Z50 (X30 Sport) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 535 |
| Zündapp Belmondo |
Accessories & related products
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Width: 27 mm · Type of current: Alternating current (AC) · Total length: 50 mm · Performance: 100 W · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
40,80 EUR
swiing® ingenious 124 g additional weight MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 65 mm · Ø inside: 24.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Thickness: 4 mm · Weight: 131 g · Number of fixing points: 3 pcs
22,40 EUR
Not in stock
swiing® ingenious 80 g additional weight MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 65 mm · Ø inside: 24.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Thickness: 4 mm · Weight: 87 g · Number of fixing points: 3 pcs
20,90 EUR
swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 65 mm · Ø inside: 24.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Thickness: 9 mm · Weight: 110 g · Number of fixing points: 4 pcs · Ø bolt circle: 50 mm · Ø mounting hole: 6 mm
42,60 EUR
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Color: black-matt · Surface: chrome-plated · Surface: raw · Width: 150 mm · Ø outside: 130 mm · Ignition system: MVT Allumage · Total length: 170 mm · Height: 82 mm · Hole spacing: 138 mm · Number of fixing points: 2 pcs
175,20 EUR
Not in stock
MVT Premium CDI Box analog ignition | Puch / Sachs
Manufacturer: MVT Allumage · Material: Plastic · Color: black · Surface: raw · Width: 27.5 mm · Total length: 56.5 mm · Height: 29.2 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
92,20 EUR
MVT Premium Stator Ignition | Puch / Sachs
Manufacturer: MVT Allumage · Material: Aluminum · Material: Plastic · Color: black · Tension: 12 V · Number of cables: 4 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 2 pcs
184,60 EUR
MVT ignition coil Premium Ignition | Puch / Sachs
Manufacturer: MVT Allumage · Place of use: External (outside the ignition) · Color: black · Ø cable holder: 7 mm · Mounting type: Screws · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 3 pcs
57,20 EUR
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Area of application: (Dis)assembly tool · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8
11,60 EUR
Hot
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Width: 27 mm · Type of current: Alternating current (AC) · Total length: 50 mm · Performance: 100 W · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
40,80 EUR
GPO piston stopper M14x1.25
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Width across flats SW: 17 mm · Total length: 83 mm · Area of application: Special tool · Diameter: 12 mm · Diameter: 16 mm · Thread type: MF14x1.25 (fine pitch thread)
11,10 EUR
swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 65 mm · Ø inside: 24.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Thickness: 9 mm · Weight: 110 g · Number of fixing points: 4 pcs · Ø bolt circle: 50 mm · Ø mounting hole: 6 mm
42,60 EUR
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Color: black-matt · Surface: chrome-plated · Surface: raw · Width: 150 mm · Ø outside: 130 mm · Ignition system: MVT Allumage · Total length: 170 mm · Height: 82 mm · Hole spacing: 138 mm · Number of fixing points: 2 pcs
175,20 EUR
Not in stock
Collection only possible with online purchase and appointment.
