Drive sprocket (chain wheel) with shoulder on both sides for your Sachs moped / moped with 503 2AL / 2BL / ABL / AB / AC / AAL / ADV, 502 AML, ML, 504, 505, 535 engine.
This drive sprocket was installed on the following models, among others: Alpa, Caravelle, Comet, DKW, Eiger, Göricke, Hercules, Prior, Pony Junior, Rico, Rixe, Walco etc.
Number of teeth (A): 10, 11, 12, 13, 14, 15, 16, 17, 18 of your choice
Total thickness (B): 5.8 mm
Thickness without shoulder (C): 4.3 mm
Mounting (D): Ø 15 x SW12
Suitable chain standard: 415
Pitch: 1/2" x 3/16"
If drive sprockets with 17 or 18 teeth are used, an adjustment in the motor gearbox is necessary!
You will find the appropriate fitting tool as well as chain whip, nut for sprocket attachment, chain spray etc. in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Sachs spare part number:
13 Zähne: A1280 - 0236 103 000
15 Zähne: A1285 - 0236 109 001
16 Zähne: A5606 - 0236 109 203
Details
| Manufacturer | GPO |
| Material | Steel |
| Surface | sandblasted |
| Chain type | 415H |
| Recording type | Ø15 x SW12 |
| Chain pitch | 1/2" x 3/16" |
| Number of teeth | 10 pcs, 11 pcs, 12 pcs, 13 pcs, 14 pcs, 15 pcs, 16 pcs, 17 pcs, 18 pcs |
| Thickness | 4.3 mm |
| Total thickness | 5.8 mm |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AML 50/2 - ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 504 (ohne Tretwelle) 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 508 - 1 A 535 |
Accessories & related products
Hot 
Wippermann drive chain No.18 (double reinforced)
Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Number of chain links: 114 pcs · Chain type: 415H · Rolling circumference: 1448 mm · Color: gray · Chain pitch: 1/2" x 3/16" · Chain lock type: Spring lock · Ø bore: 4.2 mm · Ø Pin: 4.15 mm
38,20 EUR
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain type: 415H · Rolling circumference: 1448 mm · Chain pitch: 1/2" x 3/16" · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
21,30 EUR
swiing® revival pinion attachment M12x1 (nut & spring washer) | Sachs 502, 50/2, 503
Drive: External hexagon · Manufacturer: swiing® revival parts · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Thread type: MF12x1 (fine pitch thread) · Strength class: 8 · Height: 5 mm · Pony spare part no.: A1720 · Pony spare part no.: A4249 · Sachs spare part no.: 0242 124 000 · Sachs spare part no.: 0244 189 110
4,40 EUR
Motorex chain spray Road 500 ml
Manufacturer: Motorex · Oil type: fully synthetic · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Contents [ml]: 500 ml · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Area of application: Road use
24,70 EUR
49,40 EUR/l
Autosol chain spray 400 ml
Manufacturer: Autosol · Area of application: Chemistry · Area of application: Road use · Contents [ml]: 400 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Temperature resistance (min.): -10 - 140 °C
14,50 EUR
Not in stock
36,25 EUR/l
ESJOT chain kit | Sachs 503
Manufacturer: ESJOT · Manufacturer: GPO · Material: Steel · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Pinion sizes: 10 pcs · Pinion sizes: 11 pcs · Pinion sizes: 12 pcs · Pinion sizes: 13 pcs · Pinion sizes: 14 pcs · Pinion sizes: 15 pcs · Pinion sizes: 16 pcs · Pinion sizes: 17 pcs · Pinion sizes: 18 pcs · Sprocket sizes: 34 pcs · Sprocket sizes: 37 pcs · Sprocket sizes: 40 pcs · Sprocket sizes: 45 pcs · Sprocket sizes: 50 pcs
107,00 EUR
GPO pinion 16 teeth | Sachs 503, 502, 50/2, 50/3, 50/4 (A5606)
Manufacturer: GPO · Material: Steel · Surface: sandblasted · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Thickness: 4.3 mm · Recording type: Ø15 x SW12 · Total thickness: 5.8 mm
14,50 EUR
GPO sprocket 15 teeth | Sachs 503, 502, 50/2, 50/3, 50/4 (A1285)
Manufacturer: GPO · Material: Steel · Surface: sandblasted · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Thickness: 4.3 mm · Recording type: Ø15 x SW12 · Total thickness: 5.8 mm
14,50 EUR
GPO sprocket 13 teeth | Sachs 503, 502, 50/2, 50/3, 50/4 (A1280)
Manufacturer: GPO · Material: Steel · Surface: sandblasted · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Thickness: 4.3 mm · Recording type: Ø15 x SW12 · Total thickness: 5.8 mm
14,50 EUR
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
9,85 EUR
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm · Number of components: 1 pcs · Area of application: Standard
3,15 EUR
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain type: 415H · Rolling circumference: 1448 mm · Chain pitch: 1/2" x 3/16" · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
21,30 EUR
swiing® revival pinion attachment M12x1 (nut & spring washer) | Sachs 502, 50/2, 503
Drive: External hexagon · Manufacturer: swiing® revival parts · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Thread type: MF12x1 (fine pitch thread) · Strength class: 8 · Height: 5 mm · Pony spare part no.: A1720 · Pony spare part no.: A4249 · Sachs spare part no.: 0242 124 000 · Sachs spare part no.: 0244 189 110
4,40 EUR
ESJOT sprocket 37 teeth coaster brake galvanized
Surface: galvanized (blue) · Manufacturer: ESJOT · Material: Steel · Color: silver · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 37 pcs · Thickness: 4.1 mm · Ø inside: 94 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6.5 mm · Hole spacing: 74 mm · Ø bolt circle: 105.5 mm
54,00 EUR
swiing® revival screw set for sprocket mounting coaster brake
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blank · Surface: blue galvanized · Color: gray · Number of components: 12 pcs · Drive: External hexagon · Screw head: Hexagon · Shank: No · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Width across flats SW: 8 mm · Width across flats SW: 10 mm
22,40 EUR
ESJOT sprocket 40 teeth coaster brake galvanized
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Number of teeth: 40 pcs · Ø bolt circle: 105.5 mm · Ø inside: 94 mm · Ø mounting hole: 6.5 mm · Thickness: 4.2 mm · Hole spacing: 74 mm · Number of fixing points: 4 pcs · Color: silver
56,20 EUR
ESJOT sprocket 40 teeth (4/5/6 hole) Ø 98 mm cranked black
Material: Steel · Surface: powder-coated · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Number of teeth: 40 pcs · Ø inside: 98 mm · Ø bolt circle: 115 mm · Ø mounting hole: 7 mm · Thickness: 4.5 mm · Cranking (offset): 12 mm · Number of fixing points: 4 pcs · Color: black
33,70 EUR
ESJOT chain kit | Sachs 503
Manufacturer: ESJOT · Manufacturer: GPO · Material: Steel · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Pinion sizes: 10 pcs · Pinion sizes: 11 pcs · Pinion sizes: 12 pcs · Pinion sizes: 13 pcs · Pinion sizes: 14 pcs · Pinion sizes: 15 pcs · Pinion sizes: 16 pcs · Pinion sizes: 17 pcs · Pinion sizes: 18 pcs · Sprocket sizes: 34 pcs · Sprocket sizes: 37 pcs · Sprocket sizes: 40 pcs · Sprocket sizes: 45 pcs · Sprocket sizes: 50 pcs
107,00 EUR
Collection only possible with online purchase and appointment.
