Drive sprocket (chain wheel) with shoulder on both sides for your Sachs moped / moped with 503 2AL / 2BL / ABL / AB / AC / AAL / ADV, 502 AML, ML, 504, 505, 535 engine.
This drive sprocket was installed on the following models, among others: Alpa, Caravelle, Comet, DKW, Eiger, Göricke, Hercules, Prior, Pony Junior, Rico, Rixe, Walco etc.
Number of teeth (A): 10, 11, 12, 13, 14, 15, 16, 17, 18 of your choice
Total thickness (B): 5.8 mm
Thickness without shoulder (C): 4.3 mm
Mounting (D): Ø 15 x SW12
Suitable chain standard: 415
Pitch: 1/2" x 3/16"
If drive sprockets with 17 or 18 teeth are used, an adjustment in the motor gearbox is necessary!
You will find the appropriate fitting tool as well as chain whip, nut for sprocket attachment, chain spray etc. in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Sachs spare part number:
13 Zähne: A1280 - 0236 103 000
15 Zähne: A1285 - 0236 109 001
16 Zähne: A5606 - 0236 109 203
Details
| Chain type | 415H |
| Chain pitch | 1/2" x 3/16" |
| Manufacturer | GPO |
| Material | Steel |
| Surface | sandblasted |
| Number of teeth | 10 pcs, 11 pcs, 12 pcs, 13 pcs, 14 pcs, 15 pcs, 16 pcs, 17 pcs, 18 pcs |
| Thickness | 4.3 mm |
| Recording type | Ø15 x SW12 |
| Total thickness | 5.8 mm |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AML 50/2 - ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 504 (ohne Tretwelle) 505 (mit Tretwelle) - 1A (AT), 2 A (HG) 508 - 1 A 535 |
Accessories & related products
Hot 
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4.15 mm · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.2 mm
38,20 EUR
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm
21,30 EUR
swiing® revival pinion attachment M12x1 (nut & spring washer) | Sachs 502, 50/2, 503
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Surface: burnished · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Height: 5 mm · Strength class: 8 · Thread type: MF12x1 (fine pitch thread) · Pony spare part no.: A1720 · Pony spare part no.: A4249 · Sachs spare part no.: 0242 124 000 · Sachs spare part no.: 0244 189 110
4,40 EUR
Motorex chain spray Road 500 ml
Manufacturer: Motorex · Area of application: Chemistry · Area of application: Road use · Oil type: fully synthetic · Contents [ml]: 500 ml · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
24,70 EUR
49,40 EUR/l
Autosol chain spray 400 ml
Manufacturer: Autosol · Area of application: Chemistry · Area of application: Road use · Contents [ml]: 400 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Temperature resistance (min.): -10 - 140 °C
14,50 EUR
Not in stock
36,25 EUR/l
ESJOT chain kit | Sachs 503
Manufacturer: ESJOT · Manufacturer: GPO · Material: Steel · Chain type: 415H · Pinion sizes: 10 pcs · Pinion sizes: 11 pcs · Pinion sizes: 12 pcs · Pinion sizes: 13 pcs · Pinion sizes: 14 pcs · Pinion sizes: 15 pcs · Pinion sizes: 16 pcs · Pinion sizes: 17 pcs · Pinion sizes: 18 pcs · Chain pitch: 1/2" x 3/16" · Sprocket sizes: 34 pcs · Sprocket sizes: 37 pcs · Sprocket sizes: 40 pcs · Sprocket sizes: 45 pcs · Sprocket sizes: 50 pcs
107,00 EUR
GPO pinion 16 teeth | Sachs 503, 502, 50/2, 50/3, 50/4 (A5606)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: sandblasted · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Thickness: 4.3 mm · Recording type: Ø15 x SW12 · Total thickness: 5.8 mm
14,50 EUR
GPO sprocket 15 teeth | Sachs 503, 502, 50/2, 50/3, 50/4 (A1285)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: sandblasted · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Thickness: 4.3 mm · Recording type: Ø15 x SW12 · Total thickness: 5.8 mm
14,50 EUR
GPO sprocket 13 teeth | Sachs 503, 502, 50/2, 50/3, 50/4 (A1280)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: sandblasted · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Thickness: 4.3 mm · Recording type: Ø15 x SW12 · Total thickness: 5.8 mm
14,50 EUR
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
9,85 EUR
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs
3,15 EUR
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm
21,30 EUR
swiing® revival pinion attachment M12x1 (nut & spring washer) | Sachs 502, 50/2, 503
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Surface: burnished · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Height: 5 mm · Strength class: 8 · Thread type: MF12x1 (fine pitch thread) · Pony spare part no.: A1720 · Pony spare part no.: A4249 · Sachs spare part no.: 0242 124 000 · Sachs spare part no.: 0244 189 110
4,40 EUR
ESJOT sprocket 37 teeth coaster brake galvanized
Ø inside: 94 mm · Manufacturer: ESJOT · Material: Steel · Color: silver · Surface: blue galvanized · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 37 pcs · Number of fixing points: 4 pcs · Thickness: 4.1 mm · Ø mounting hole: 6.5 mm · Hole spacing: 74 mm · Ø bolt circle: 105.5 mm
54,00 EUR
swiing® revival screw set for sprocket mounting coaster brake
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blank · Surface: blue galvanized · Color: gray · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 8 mm · Width across flats SW: 10 mm · Shank: No · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Number of components: 12 pcs
22,40 EUR
ESJOT sprocket 40 teeth coaster brake galvanized
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blue galvanized · Color: silver · Number of teeth: 40 pcs · Thickness: 4.2 mm · Ø bolt circle: 105.5 mm · Ø inside: 94 mm · Number of fixing points: 4 pcs · Hole spacing: 74 mm · Ø mounting hole: 6.5 mm
56,20 EUR
ESJOT sprocket 40 teeth (4/5/6 hole) Ø 98 mm cranked black
Ø inside: 98 mm · Manufacturer: ESJOT · Material: Steel · Surface: powder-coated · Color: black · Chain type: 415H · Chain pitch: 1/2" x 3/16" · Number of teeth: 40 pcs · Number of fixing points: 4 pcs · Thickness: 4.5 mm · Ø mounting hole: 7 mm · Cranking (offset): 12 mm · Ø bolt circle: 115 mm
33,70 EUR
ESJOT chain kit | Sachs 503
Manufacturer: ESJOT · Manufacturer: GPO · Material: Steel · Chain type: 415H · Pinion sizes: 10 pcs · Pinion sizes: 11 pcs · Pinion sizes: 12 pcs · Pinion sizes: 13 pcs · Pinion sizes: 14 pcs · Pinion sizes: 15 pcs · Pinion sizes: 16 pcs · Pinion sizes: 17 pcs · Pinion sizes: 18 pcs · Chain pitch: 1/2" x 3/16" · Sprocket sizes: 34 pcs · Sprocket sizes: 37 pcs · Sprocket sizes: 40 pcs · Sprocket sizes: 45 pcs · Sprocket sizes: 50 pcs
107,00 EUR
Collection only possible with online purchase and appointment.
