Simple, chrome-plated backlight with rubber base in old-school design. Very similar to old Hella, ULO or CEV tail lights.
The glass is embedded in an aluminum socket. The tail light is fastened with two M6 screws.
This tail light fits BAY15d bulbs. One bulb is already installed.
Total length: 100 mm
Total width: 57 mm
Depth: 60 mm
Number of mounting points: 2 pieces
Thread: M6
Screw distance to each other: 60 mm
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Manufacturer | GPO |
| Depth | 60 mm |
| Test mark | none |
| Tension | 6 V |
| Material | Aluminum |
| Ø Receptacle | 5 mm |
| Color | Chrome, red |
| Bulb holder | BAY15d |
| Width | 60 mm |
| Mounting type | Nuts & bolts |
| Height | 100 mm |
| Battery operated | No |
| Number of fixing points | 2 pcs |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs |
Accessories & related products
GPO tail light ULO | Puch Maxi N, S old version
Manufacturer: GPO · Depth: 80 mm · Test mark: none · Material: Plastic · Tension: 6 V · Ø Receptacle: 4 mm · Color: black · Color: red · Bulb holder: BA15s · Mounting type: Nuts & bolts · Width: 60 mm · Height: 110 mm · Battery operated: No · Number of fixing points: 2 pcs
43,00 EUR
GPO rear light Classic black matt
Manufacturer: GPO · Depth: 60 mm · Test mark: none · Material: Aluminum · Tension: 6 V · Ø Receptacle: 5 mm · Bulb holder: BAY15d · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Height: 100 mm · Battery operated: No · Color: black · Color: red · Width: 60 mm
56,50 EUR
swiing® revival wiring harness MERIT light switch (version 2.0)
Cable cross-section [mm²]: 1.5 mm² · Manufacturer: swiing® revival parts · Area of application: Standard · Ø Receptacle: 22 mm · Number of cables: 5 pcs · Cable bifurcation to motor: 950 mm · Switch included: Yes · Luster terminal: Yes · Cable bifurcation to lamp: 230 mm · Cable bifurcation to switch: 400 mm · Tail light cable length: 1000 mm
47,10 EUR
Not in stock
Hot 
Rear light ULO | Sachs, Puch
Depth: 55 mm · Test mark: none · Material: Aluminum · Material: Steel · Tension: 6 V · Ø Receptacle: 5 mm · Bulb holder: E10 · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Height: 90 mm · Color: Chrome · Battery operated: No · Color: red · Width: 57 mm
69,20 EUR
Not in stock
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Total length: 145 mm · Number of fixing points: 2 pcs · Thread length: 8 mm · Ø mounting hole: 5 mm · Height: 5.3 mm · Color: silver · Hole spacing: 30 mm · Hole spacing: 50 mm · Width: 105 mm
12,90 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Manufacturer: Magura · Material: Brass · Material: Steel · Thread type: M4x0.7 (standard thread) · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Total length: 6 mm · Thread length: 4 mm · Ø outside: 5 mm
2,35 EUR
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch · Temperature resistance (min.): -30 - 220 °C
11,70 EUR
26,00 EUR/l
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Color: Chrome · Surface: polished · Folding the ends: closed folded · Wheel size [inch]: 17 " · Shape of the mudguard: angular · Total length over ends: 565 mm · Mounting type: Nuts & bolts · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm
41,20 EUR
Collection only possible with online purchase and appointment.
