Simple tail light in "old-school design" for your moped, moped and small motorcycle.
Very similar to old Hella, ULO or CEV tail lights.
The red reflector glass is embedded in an aluminum frame. A transparent window is embedded at the bottom, which serves as license plate illumination.
Two screws are embedded in the end light for fastening. The rear light can therefore be attached to the mudguard.
Thread: M6
Screw spacing: 60 mm
Light source: BAY15d (One bulb is already installed in the rear light.)
Total length: 100 mm
Total width: 57 mm
Depth: 60 mm
Alternative rear lights and bulbs can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Manufacturer | GPO |
| Material | Aluminum |
| Tension | 6 V |
| Color | black, red |
| Width | 60 mm |
| Bulb holder | BAY15d |
| Ø Receptacle | 5 mm |
| Test mark | none |
| Mounting type | Nuts & bolts |
| Height | 100 mm |
| Battery operated | No |
| Depth | 60 mm |
| Number of fixing points | 2 pcs |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs |
Accessories & related products
GPO tail light ULO | Puch Maxi N, S old version
Manufacturer: GPO · Material: Plastic · Test mark: none · Color: black · Color: red · Width: 60 mm · Bulb holder: BA15s · Height: 110 mm · Tension: 6 V · Number of fixing points: 2 pcs · Ø Receptacle: 4 mm · Battery operated: No · Depth: 80 mm · Mounting type: Nuts & bolts
42,70 EUR
GPO rear light Classic chrome with base
Manufacturer: GPO · Material: Aluminum · Test mark: none · Tension: 6 V · Color: Chrome · Color: red · Width: 60 mm · Height: 100 mm · Bulb holder: BAY15d · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Battery operated: No · Ø Receptacle: 5 mm · Depth: 60 mm
56,00 EUR
Hot 
Rear light ULO | Sachs, Puch
Material: Aluminum · Material: Steel · Test mark: none · Tension: 6 V · Color: Chrome · Color: red · Width: 57 mm · Height: 90 mm · Bulb holder: E10 · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Battery operated: No · Ø Receptacle: 5 mm · Depth: 55 mm
68,60 EUR
Not in stock
Moped fans like you also bought:
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Bearing type: Plain bearing · Manufacturer: swiing® revival parts · Ø Bundle: 24.1 mm · Material: Nylon · Color: black · Surface: blank · Ø inside: 16.2 mm · Total length: 19 mm · Ø outside: 20.2 mm · Puch OEM number: 349.1.42.005.1
2,90 EUR
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
15,10 EUR
GPO mudguard strut front 17" black
Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Distance mudguard - center hole: 300 mm · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm · Mounting type: Nuts & bolts · Total length: 305 mm · Wheel size [inch]: 17 " · Number of fixing points: 4 pcs
17,40 EUR
Collection only possible with online purchase and appointment.
