Original reproduction air filter for your Puch Supermaxi LG1, LG2 moped / moped with catalytic converter.
The air filter box is supplied in disassembled condition.
To make assembly easier, we recommend briefly placing the air filter housing in warm water to soften the plastic.
Carburetor connection diameter with Büchse: 20 mm (can also be mounted on a normal Puch Maxi S or N, but the flange must be shortened)
Carburetor connection diameter without Büchse: 28 mm
Select the desired air filter screen in the selection field:
- Standard: original air filter screen
- Racing: Screen with fewer filter layers for more air flow
- Tuning: two-layer filter mat for maximum air flow
Note: From the factory, a joint with silicone sealant was drawn around the seam of the original air filter after the two parts were joined to eliminate the risk of air leakage. We recommend doing the same with this air filter.
You will find a suitable sealant and other useful parts in the accessories section.Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
The set includes the following fixed parts:
Manufacturer: GPO · Camouflaged: Yes · Color: black · Material: Plastic · Filter type: Box · Ø Internal connection: 20 mm, 28 mm · Mounting type: Plug connection clamped · Area of application: Tuning
Details
Manufacturer | GPO |
Camouflaged | Yes |
Material | Plastic |
Color | black |
Area of application | Standard, Tuning |
Filter type | Standard sieve, Racing screen, Foam |
Ø Internal connection | 28 mm |
Mounting type | Plug connection clamped |
Suitable for the following models
Puch |
Accessories & related products
swiing nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5 · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64
17,90 EUR
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Material: Silicone · Contents [ml]: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm
22,40 EUR
320,00 EUR/l
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs
3,15 EUR
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: blue galvanized · Surface: raw · Color: silver · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
14,50 EUR
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Area of application: Tuning · Surface: raw · Carburetor type: SRE · Total length: 65 mm · Nominal diameter: 17 mm · Width: 47 mm · Ø Internal connection: 23 mm · Height: 89 mm · Height: 109 mm · Ø Inside entrance: 17 mm · Mounting type: Plug connection clamped · Ø Output inside: 17.1 mm · Ø Air filter connection: 27.5 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.2 · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
135,10 EUR
swiing® ingenious intake manifold 17 mm SRF | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Mounting type: Stud bolts & nuts · Ø inside: 17 mm · Number of fixing points: 2 pcs · Total length: 38 mm · Height flange center hole: 42 mm · Total height: 53.5 mm · Ø External connection: 23 mm · Hole spacing inlet: 38 mm
50,60 EUR