Zinc-plated sprocket with 50 teeth for sprockets on your moped / moped.
The sprocket is not cranked and fits various brands and models such as Puch X30 NS / NL, X30 Velux, various Sachs, Zündapp Belmondo etc.
The positioning knobs can be seen in picture 3 (four pieces in total).
Matching attachments as well as fastening bolts, chains and a selection of sprockets can be found in the accessories section.
German quality product from the manufacturer ESJOT in original equipment quality.
Details
| Chain type | 415H |
| Chain pitch | 1/2" x 3/16" |
| Manufacturer | ESJOT |
| Material | Steel |
| Surface | blue galvanized |
| Color | silver |
| Number of teeth | 50 pcs |
| Ø bolt circle | 105.5 mm |
| Thickness | 4.3 mm |
| Ø inside | 94 mm |
| Number of fixing points | 4 pcs |
| Ø mounting hole | 6.4 mm |
Suitable for the following models
| Puch | |
| Sachs | |
| Zündapp Belmondo | |
| Cilo |
Accessories & related products
Hot 
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4.15 mm · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.2 mm
38,20 EUR
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm
21,30 EUR
Motorex chain spray Road 500 ml
Manufacturer: Motorex · Area of application: Chemistry · Area of application: Road use · Oil type: fully synthetic · Contents [ml]: 500 ml · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
24,70 EUR
49,40 EUR/l
swiing® revival screw set for sprocket mounting coaster brake
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blank · Surface: blue galvanized · Color: gray · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 8 mm · Width across flats SW: 10 mm · Shank: No · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Number of components: 12 pcs
22,40 EUR
Autosol chain spray 400 ml
Manufacturer: Autosol · Area of application: Chemistry · Area of application: Road use · Contents [ml]: 400 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Temperature resistance (min.): -10 - 140 °C
14,50 EUR
Not in stock
36,25 EUR/l
ESJOT chain kit | Puch X30 Sport / Velux
Manufacturer: ESJOT · Manufacturer: GPO · Material: Steel · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Pinion sizes: 9 pcs · Pinion sizes: 10 pcs · Pinion sizes: 11 pcs · Pinion sizes: 12 pcs · Pinion sizes: 13 pcs · Pinion sizes: 14 pcs · Pinion sizes: 15 pcs · Pinion sizes: 16 pcs · Pinion sizes: 17 pcs · Pinion sizes: 18 pcs · Pinion sizes: 19 pcs · Pinion sizes: 20 pcs · Pinion sizes: 21 pcs · Sprocket sizes: 34 pcs · Sprocket sizes: 37 pcs · Sprocket sizes: 40 pcs · Sprocket sizes: 45 pcs · Sprocket sizes: 50 pcs
101,30 EUR
GPO sprocket (10-18 teeth, of your choice) | Sachs 502, 503, 504, 505, 535
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: sandblasted · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Thickness: 4.3 mm · Recording type: Ø15 x SW12 · Total thickness: 5.8 mm
14,50 EUR
ESJOT sprocket 11 - 15 teeth | Sachs 50/2
Manufacturer: ESJOT · Material: Steel · Surface: raw · Chain type: 415H · Recording type: Cone mounting · Chain pitch: 1/2" x 3/16" · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Thickness: 4.1 mm · Total thickness: 15 mm
36,00 EUR
GPO sprocket 9 - 21 teeth wide | Puch
Manufacturer: GPO · Material: Steel · Surface: Hardened · Chain type: 415H · Recording type: Interlocking · Chain pitch: 1/2" x 3/16" · Number of teeth: 9 pcs · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Number of teeth: 19 pcs · Number of teeth: 20 pcs · Number of teeth: 21 pcs · Total thickness: 4.6 mm
9,00 EUR
Moped fans like you also bought:
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: any · Mounting type: Union nut · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 50 mm
25,80 EUR
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Color: silver · Thread type: M5x0.8 (standard thread) · Total length: 145 mm · Width: 105 mm · Height: 5.3 mm · Thread length: 8 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Ø mounting hole: 5 mm
12,30 EUR
Hot
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4.15 mm · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.2 mm
38,20 EUR
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm
21,30 EUR
swiing® revival pinion attachment M12x1 (nut & spring washer) | Sachs 502, 50/2, 503
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Surface: burnished · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Height: 5 mm · Strength class: 8 · Thread type: MF12x1 (fine pitch thread) · Pony spare part no.: A1720 · Pony spare part no.: A4249 · Sachs spare part no.: 0242 124 000 · Sachs spare part no.: 0244 189 110
4,40 EUR
swiing® revival screw set for sprocket mounting coaster brake
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Material: Steel · Surface: blank · Surface: blue galvanized · Color: gray · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 8 mm · Width across flats SW: 10 mm · Shank: No · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Number of components: 12 pcs
22,40 EUR
Collection only possible with online purchase and appointment.
