Hydraulic telescopic fork of the EBR brand suitable for Piaggio Ciao mopeds.
Special bracket for mounting a disc brake system. The lower mounting hole is 53 mm above the wheel axle.
The two mounting holes with Ø8.7 mm are 61 mm apart. The upper hole is therefore 114 mm above the wheel axle.
The two aluminum end bolts on the fork legs make it much easier to change the oil.
The solid fork is largely made of aluminum.
The snap ring is included in the scope of delivery. Further accessories can be found below.
Total length: 67 cm
Head tube length: 220 mm
Internal diameter of head tube (for stem mounting): 21.5 mm
Internal distance between fork legs (for mounting the rear axle): 120 mm
Head tube thread: 1" / 24G
Branded product from the Italian manufacturer EBR.
Details
| Manufacturer | EWC |
| Material | Aluminum, Steel |
| Surface | varnished, chrome-plated |
| Color | black, Chrome |
| Adjustable | Yes |
| Total length | 660 mm, 635 mm |
| Spar end distance (center-center) | 150 mm |
| Ø outer head tube | 25.4 mm |
| Ø spars | 28 mm |
| Ø head tube inside | 21 mm |
| Head tube length | 220 mm |
| Thread length | 58 mm |
| Fork bridge - center wheel axle | 390 mm |
| Thread type | FG25.4 (1" 24G) |
| Distance brake cam to wheel axle center-center | 35 mm |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao |
Accessories & related products
GPO control bearing set | Piaggio Ciao
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Ø inside: 27 mm · Bearing type: Bearing ring · Ø outside: 41.4 mm · Ø outside: 42 mm · Thread type: FG25.4 (1" 24G) · Ø mounting frame: 30.05 mm · Color: silver · Height: 10.5 mm · Height: 17 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm)
22,10 EUR
swiing® revival front fender Inox | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Color: Chrome · Folding the ends: open folded · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 640 mm · Wide mudguard profile: 76 mm · Mounting type: Nuts & bolts · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 162 mm · Piaggio OEM number: 274184
40,80 EUR
swiing® revival front fender Inox black | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Color: black · Surface: varnished · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 640 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 162 mm · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Mounting type: Nuts & bolts
58,30 EUR
Clamping screw front brake original | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Area of application: Original · Material: Steel · Surface: galvanized (blue) · Width across flats SW: 11 mm · Thread type: M7x1 (standard thread) · Total length: 20.5 mm · Drive: External hexagon · Screw head: Hexagon · Thread length: 13.5 mm · Number of components: 7 pcs · Piaggio OEM number: 154533
19,80 EUR
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm · Drive: Slot
2,35 EUR
Brake caliper, brake hose & brake lever for EBR forks
Material: Cast aluminum · Color: gray · Surface: varnished · Cable length: 900 mm · Thread type: M8x1.25 (standard thread) · Hole spacing: 32 mm · Hole spacing: 60 mm · Brake lever length (lever length): 162 mm · Ø Handlebars: 22 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs
191,60 EUR
Collection only possible with online purchase and appointment.
