Complete steering head bearing set for your Piaggio Ciao moped / moped
.With this steering bearing set you can completely repair the steering unit of your Italian pearl and are thus completely safe on the road again.
Bearing shell mounting diameter: 30 mm
Internal diameter of the head tube bearing race: 27 mm
Thread: FG25.4 (1" 24G)
Note: During assembly, all units of the headset should be lubricated with plenty of bearing grease to ensure clean running in the bearing shells.
You can find more steering head sets as well as handlebars and bearing grease in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Piaggio spare part number: 814231
Details
| Ø outside | 42 mm, 41.4 mm |
| Manufacturer | GPO |
| Material | Steel |
| Surface | galvanized (blue) |
| Bearing type | Bearing ring |
| Color | silver |
| Ø mounting frame | 30.05 mm |
| Ø inside | 27 mm |
| Ø ball [inch] / [mm] | 5/32" (4.00 mm) |
| Thread type | FG25.4 (1" 24G) |
| Height | 10.5 mm, 17 mm |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao |
Accessories & related products
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
11,60 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Total length: 6 mm · Drive: Slot · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 4 mm · Ø Cable bushing: 1.6 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated
2,35 EUR
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 250 mm
35,10 EUR
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Material: Plastic · Test mark: none · Color: black · Color: red · Bulb holder: BA9s · Width: 130 mm · Depth: 43 mm · Height: 58 mm · Battery operated: No · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
22,20 EUR
Cable set black matt | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears
23,30 EUR
Lock washer control head / end nut original | Piaggio Ciao
Manufacturer: Piaggio · Thickness: 1.5 mm · Area of application: Standard · Material: Steel · Surface: galvanized (yellow) · Color: silver · Number of lobes: 3 pcs · Ø inside: 25.5 mm · Ø outside: 32.8 mm · Piaggio OEM number: 189305
3,40 EUR
swiing® ingenious axle swing arm set | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Material: Brass · Material: Chrome steel (stainless steel) · Color: gold · Drive: External hexagon · Ø Bearing inside: 12.85 mm · Ø outside: 16 mm · Ø outside: 22 mm · Total length: 50 mm · Thread type: M8x1.25 (standard thread) · Thread length: 22 mm
35,10 EUR
swiing® revival steerer tube nut 1" / 24G open stem chrome | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Thread type: FG25.4 (1" 24G) · Drive: External hexagon · Ø outside: 34.5 mm · Height: 18 mm · Thread depth: 12 mm · Width across flats SW: 32 mm
17,50 EUR
Collection only possible with online purchase and appointment.
