Cylinder head for mopeds / mopeds with windage Sachs 50, 502 & 50/2 engines with decompression connection.
New from 40-year old stock. May therefore show slight signs of storage, but these do not impair functionality in any way.
The cooling fins have a larger outer diameter than the traditional blown Swiss models.
Ø outer ribs: 105 mm
Combustion chamber layout: 7:1
In order to be able to fit the cylinder to a Sachs 50/2 CH engine with blower, adaptation work must be carried out.
NOS – New from old stock.
Original Sachs spare part number: A1064 / 0213 103 099 / 0213 103 005
Details
| Manufacturer | Sachs |
| Area of application | Original |
| Ø outside | 105 mm |
| Number of fixing points | 4 pcs |
Suitable for the following models
| Sachs | 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Accessories & related products
swiing® revival Silentblock Ø 19.3 x 19 mm | Sachs 50/2 (A1940)
Ø inside: 8.5 mm · Manufacturer: swiing® revival parts · Waistband height: 1.5 mm · Area of application: Standard · Material: Rubber · Material: Steel · Color: black · Surface: raw · Total length: 19 mm · Ø Bundle: 13 mm · Ø Bundle: 15 mm · Ø outside: 19.3 mm · Pony spare part no.: A1940 · Sachs spare part no.: 0260 101 000
7,80 EUR
swiing® revival screw set cylinder head Inox | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Chrome steel (stainless steel) · Total length: 34 mm · Drive: External hexagon · Thread length: 22 mm · Screw head: Hexagon · Shank: Yes · Width across flats SW: 10 mm · Number of components: 12 pcs · Ø shaft: 5.85 mm · Thread type: M6x1 (standard thread) · Shank length: 8 mm
8,35 EUR
Cylinder 38 mm diaphragm 2 lugs NOS | Sachs Saxonette
Manufacturer: Sachs · Area of application: Original · Material: Gray cast iron · Surface: raw · Crankshaft stroke: 42 mm · Displacement: 50 ccm · Ø cylinder neck: 43.8 mm · Nominal diameter: 41 mm · Number of fixing points: 4 pcs · Ø outlet inside: 26.3 mm · Hole spacing inlet: 67 mm · Inlet window: 56 x 18 · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 51 x 40 mm / 37 x 37 mm · Decompressor: No · Outlet type: Union nut · Thread outlet: M35x2 (standard thread)
326,80 EUR
Moped fans like you also bought:
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Color: blue · Surface: coated · Total length: 28 mm · Ø outside: 8.3 mm · Ø inside: 4.8 mm · Number of components: 3 pcs
20,20 EUR
GPO gasket set with oil seals slotted version | Sachs 50/2 engine
Manufacturer: GPO · Area of application: Standard · Ø outlet inside: 28 mm · Hole spacing inlet: 31 mm · Number of components: 14 pcs · Hole pattern [mm]: 60 x 40 · Pony spare part no.: A2582 · Sachs spare part no.: 0286 156 001
45,00 EUR
Clutch basket 21 teeth needle bearing lightened | Puch E50
Ø inside: 15 mm · Area of application: Tuning · Material: Steel · Color: graphite colors · Recording type: Interlocking · Toothing type: helical toothed · Number of teeth: 21 pcs · Height: 49.5 mm · Ø outside: 99.6 mm · Ø Receptacle: 30.5 mm
140,80 EUR
Not in stock
swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Area of application: Standard · Surface: hardened & ground · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm · Ø outside: 22 mm · Ø outside: 24 mm · Ø inside: 15 mm · Ø inside: 17 mm
43,60 EUR
GPO rear light with black base
Manufacturer: GPO · Test mark: none · Material: Aluminum · Material: Plastic · Color: black · Color: red · Tension: 6 V · Width: 64 mm · Bulb holder: E10 · Height: 110 mm · Number of fixing points: 2 pcs · Depth: 65 mm · Mounting type: Nuts & bolts · Battery operated: No
55,10 EUR
Collection only possible with online purchase and appointment.
