Lightened clutch basket with 21 teeth suitable for Puch Maxi mopeds with 1-speed e50 engine.
Special design with needle bearing. This clutch basket was developed for heavily souped-up engines where the brass bushing bearing reaches its limits.
Advantages of the needle bearing:
- Higher speeds possible
- Smooth, even running
- Optimal lubrication
- Better heat dissipation
Optimal adjustment of the clutch basket clearance is essential. Inadequate adjustment can destroy the bearing in a very short time.
Note the corresponding dimensions in Figure 3.
You will find suitable thrust washers in the accessories, which are fitted in front of and behind the clutch basket.
Details
| Height | 49.5 mm |
| Material | Steel |
| Number of teeth | 21 pcs |
| Toothing type | helical toothed |
| Ø inside | 15 mm |
| Color | graphite colors |
| Recording type | Interlocking |
| Ø Receptacle | 30.5 mm |
| Ø outside | 99.6 mm |
| Area of application | Tuning |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Color: silver · Resistance: 1000 Ω · Suppressed: Yes · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
9,85 EUR
Clutch 3-jaw (aluminum) | Puch E50
Material: Aluminum · Area of application: Original · Area of application: Standard · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Ø outside: 93 mm · Ø inside: 12 mm · Ø inside: 14.6 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Thickness: 20.9 mm
56,20 EUR
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication with clutch · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,20 EUR
24,89 EUR/l
swiing® revival stud bolt set M6 x 106 mm | Puch
Total length: 106 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Alternative version of the Puch spare part no.: 360.1.10.034.1
8,35 EUR
swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Area of application: Standard · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm · Ø inside: 15 mm · Ø inside: 17 mm · Ø outside: 22 mm · Ø outside: 24 mm
43,60 EUR
Collection only possible with online purchase and appointment.
