Seilzugstarter
Sort:Popularity
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Color: black-matt · Surface: chrome-plated · Ignition system: BOSCH · Ignition system: DUCATI · Total length: 160 mm · Width: 150 mm · Height: 88 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm
169,00 EUR
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Color: Chrome · Material: Plastic · Material: Steel · Color: black-matt · Surface: chrome-plated · Surface: raw · Ignition system: MVT Allumage · Total length: 170 mm · Width: 150 mm · Height: 82 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm
169,00 EUR
Not in stock
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Color: Chrome · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Ignition system: PVL · Total length: 170 mm · Width: 150 mm · Height: 80 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm
169,00 EUR
swiing® ingenious pull starter EVO & HPI ignition (210) | Puch E50
Manufacturer: swiing® ingenious parts · Color: Chrome · Material: Plastic · Material: Steel · Color: black · Surface: chrome-plated · Surface: raw · Ignition system: HPI · Total length: 160 mm · Width: 135 mm · Height: 93 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm
169,00 EUR
swiing® ingenious screw M6x25 special drive pinion pull rope starter PVL, Selettra
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Total length: 25 mm · Drive: Hexagon socket · Screw head: Countersunk head · Width across flats SW: 4 mm · Strength class: 10.9 · Thread type: M6x1 (standard thread)
3,25 EUR
swiing® ingenious special screw M6x12 drive pinion pull rope starter MVT
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Total length: 12 mm · Drive: Hexagon socket · Screw head: Countersunk head · Width across flats SW: 4 mm · Thread type: M6x1 (standard thread)
3,25 EUR
Professional pull starters for your Puch racing or cross moped
A racing or cross moped that has to be started or pushed conventionally generally has no chance in competition. Especially not if it has to be restarted during a race. For this reason, moped enthusiasts who are active in moped cross or racing have long relied on the installation of pull starters, such as those found on chainsaws. They make the starting process much easier and faster. With such a starter, you can (re)start your Puch moped in any situation and on any terrain. We can supply you with the right pull starter to match your tuning ignition, especially for your Puch moped. The reversing starters that you order in our shop are a sophisticated in-house development from our own brand swiing. In addition to high-quality materials, a great deal of passion, expertise, passion and engineering skills have gone into the starters, which have proven themselves in professional moped racing.
How to equip your racing moped with a starter cable
The pull-wire starters from our shop can be fitted to your Puch moped relatively easily and without major effort, as they have been specially optimised for different moped manufacturers and ignition variants. Firstly, make sure that you select the right pull-wire starter for the racing ignition you have installed on your racing or cross moped from our range. Then, if you have not already done so, you must remove the moped pedals from your bike. These can no longer be used as they would otherwise hit the starter. You must therefore either install footrests or a longer pedal axle or a pedal axle extension in order to continue using the pedals. You can then install the reversing starter on your Puch moped. To do this, you must first screw the counterpart (starter pinion) onto the pole wheel and then attach and screw on the starter housing.
Pull starter for Puch-Maxi models and all common racing ignitions
All cable starters available from us for your Puch moped come from our own brand swiing. As with all swiing products, these are not mass-produced off-the-shelf items, but high-quality, specifically developed parts in genuine Swiss manufacturing quality. As the reversing starters are designed for use on cross and racing mopeds, they can withstand enormous loads and fulfil the highest demands in terms of performance and reliability. All starter components are perfectly matched to each other. It goes without saying that we can supply you with cable starters for your Puch motorbike to match the racing ignition you use. We offer models that you can use with your ignition from PVL, HPI, MVT, Bosch and Ducati as well as Selettra. Each pull-wire starter is optimally matched to the respective ignition model and can be fitted without any further adjustments.
Order professional pull-wire starters in proven Swiss quality online at mofakult
Rely on reliable technology and Swiss engineering for your racing moped! Equip your Puch moped now with a high-quality cable starter from swiing. We can supply you with the complete starter as well as individual parts, such as the starter pinion or matching crash bars, directly from stock at a fair price. You can therefore fit your cable starter for your Puch-Maxi moped to your racing moped within a few days. If you need help or further information, please contact us by email or phone. We will be happy to advise you.
Collection only possible with online purchase and appointment.
