Ready-to-install rope starter for clockwise rotating Puch E50 engines on your Puch Maxi S / N or Puch Supermaxi LG1 moped / moped. Can only be fitted in conjunction with a PVL license plate.
Made in Switzerland. Designed for the highest loads and proven in racing.
Installation:
1. Starter pinion: Clean the PVL pole wheel, then screw the counterpart for the pull-wire starter onto the pole wheel (secure the enclosed screws with Loctite).
2. Cable starter: Position the starter housing correctly and tap lightly with a plastic hammer until the cable starter fits perfectly. It can then be screwed into place.
Application:
1. Before starting, pull the cable slowly a few times so that the engine turns over empty (must be done before each start attempt).
2. Pull out the cable starter handle until it engages fully and you encounter resistance. Then pull through in one go.
Tip: Wear gloves! Hold the handle firmly.
Note: The pedal mechanism can no longer be operated as the pedal arms would come into contact with the housing of the pull starter. Therefore, footrests, a longer pedal axle or a pedal axle extension must be fitted.
Other helpful parts for the cable starter conversion such as Loctite, racing gloves, replacement cord, rubber mallet etc. can be found in the accessories section. You can find them in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Steel, Plastic |
| Surface | chrome-plated, raw |
| Color | Chrome |
| Ignition system | PVL |
| Total length | 170 mm |
| Width | 150 mm |
| Ø outside | 130 mm |
| Height | 80 mm |
| Number of fixing points | 2 pcs |
| Hole spacing | 138 mm |
Suitable for the following models
| Puch | E50 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Temperature resistance (min.): -75 - 200 °C · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
24,70 EUR
2 470,00 EUR/l
GPO pedal axle with chrome rim | Puch Supermaxi LG1, LG2
Manufacturer: GPO · Material: Steel · Color: Chrome · Surface: chrome-plated · Chain pitch: 1/2" x 3/16" · Number of teeth: 28 pcs · Wavelength from wreath: 41 mm · Wavelength from wreath: 206 mm · Ø Outer sprocket: 120 mm · Ø Pedal arm holder: 15.9 mm · Ø Bearing support: 15.9 mm · Ø outside: 15.9 mm · Total length: 257 mm · Crank (wreath): 7.5 mm
67,50 EUR
swiing® ingenious screw M6x25 special drive pinion pull rope starter PVL, Selettra
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blue galvanized · Thread type: M6x1 (standard thread) · Screw head: Countersunk head · Total length: 25 mm · Drive: Hexagon socket · Width across flats SW: 4 mm · Strength class: 10.9
3,25 EUR
IXS motorcycle gloves Skull S black
Manufacturer: IXS · Test mark: EN13594:2015 · Material: Polyester (PES) · Color: black · Color: white · Gender: Unisex · Size: L · Size: S · Hand circumference: 21 - 22 cm · Hand circumference: 22 - 23 cm · Hand circumference: 23 - 24 cm · Hand circumference: 24 - 25 cm
47,10 EUR
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Thread length: 4 mm · Screw head: Lens head · Total length: 6 mm · Number of components: 2 pcs
2,25 EUR
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Temperature resistance (min.): -45 - 200 °C · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Area of application: Gearbox lubrication with clutch · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,20 EUR
24,89 EUR/l
PVL ignition coil analog 105458 / 458115
Manufacturer: PVL · Color: black · Place of use: External (outside the ignition) · Ø mounting hole: 6 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
112,40 EUR
PVL stator "1443" ignition
Manufacturer: PVL · Color: black · Color: gray · Material: Aluminum · Surface: dull · Number of cables: 2 pcs · Number of fixing points: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
112,40 EUR
PVL internal rotor ignition left-, right-turning
Manufacturer: PVL · Material: Aluminum · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Mounting type: Screws · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning
285,10 EUR
Collection only possible with online purchase and appointment.
