Bladed 41 mm (55 ccm) cylinder kit with 12 mm piston pin, suitable for your Puch X30 Velux and X30 NG-2AH moped / moped and with adaptations to your DS, MV, MS, VZ (EX50) small motorcycle
The timing was kept rather low on the cylinder, which is characterized by a very nice torque in the lower speed range.
Details:
Cast iron reproduction cylinder with Ø 41.0 mm bore
Slot-controlled
Ø 19 mm intake, 32 mm stud spacing
Optimized overflow channels
Improved timing
No need for spindling of the engine housing (Ø cylinder neck 45.0 mm)
Ø 25 mm outlet, 42 mm stud bolt spacing
Hole pattern stud bolt: 44 x 44 mm
Incl. Ø 41 mm piston from the Italian manufacturer -GOL-
Notes:
For Puch Velux engines, the slot on the housing no longer needs to be cast on thanks to the large sealing surface.
For ZA50-G engines, the housing may need to be spindled on.
The cylinder kit can also be used on DS, MV, MS, VZ (EX50) engines, provided the housing is spindled on.
Corresponding accessories such as gaskets, cylinder head, exhaust system etc. can be found in the accessories section.
Made by the BADASS brand.
Details
| Manufacturer | BAD ASS |
| Material | Gray cast iron |
| Surface | sandblasted |
| Ø cylinder neck | 44.9 mm |
| Nominal diameter | 41 mm |
| Ø Inlet inside | 19 mm |
| Ø piston pin (B) | 12 mm |
| Ø outlet inside | 25 mm |
| Thread inlet | M6x1 (standard thread) |
| Number of fixing points | 4 pcs |
| Hole spacing outlet | 42 mm |
| Area of application | Tuning |
| Hole spacing inlet | 32 mm |
| Outlet type | straight |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Decompressor | No |
| Camouflaged | No |
Suitable for the following models
| Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 32 mm · Area of application: Tuning
144,00 EUR
swiing resonance exhaust set Ø 28 / 70 mm | Puch X30 Velux
Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Screwed clamp · Ø outside: 70 mm · Ø Internal connection: 28 mm · Total length: 730 mm · Exhaust type: Cigar · Flame tube attachment: Flange
175,70 EUR
swiing® revival stud bolt set M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 6 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Total length: 30 mm · Thread length: 12 mm · Width across flats SW: 10 mm · Strength class: 8 · Strength class: 10.9
12,40 EUR
GOL piston 41 mm BAD ASS Lucifer | Puch X30 Velux, NG-2AH
Manufacturer: BAD ASS · Ø outside piston (A): 40.94 mm · Compression height (C): 22.4 mm · Curvature (D): 2.4 mm · Total piston height (E): 48.3 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 41 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston weight: 86 g
81,90 EUR
GPO cylinder gasket set BAD ASS Lucifer / GPO Sombrero 41 mm | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Thickness: 0.4 mm · Thickness: 0.45 mm · Ø cylinder: 41 mm · Area of application: Tuning · Number of components: 4 pcs · Ø outlet inside: 27 mm · Hole spacing outlet: 32 mm · Hole spacing inlet: 32 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
23,30 EUR
GPO Ø 41 mm "Sombrero" cylinder kit | Puch X30 Velux, NG-2AH
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 44.7 mm · Ø outlet inside: 25 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
234,30 EUR
Moped fans like you also bought:
swiing® ingenious flame tube 28 mm chrome | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Stud bolts & nuts · Ø outside: 28 mm · Ø inside: 25 mm · Total length: 380 mm · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm
46,80 EUR
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Area of application: Tuning · Number of components: 4 pcs · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 38 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
10,40 EUR
swiing 15 mm carburetor tuning camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Mounting type: Plug connection clamped · Carburetor type: SRE · Width: 50 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Total length: 66 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Height: 95 mm · Area of application: Tuning · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
93,70 EUR
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 32 mm · Area of application: Tuning
144,00 EUR
GPO cylinder gasket set BAD ASS Lucifer / GPO Sombrero 41 mm | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Thickness: 0.4 mm · Thickness: 0.45 mm · Ø cylinder: 41 mm · Area of application: Tuning · Number of components: 4 pcs · Ø outlet inside: 27 mm · Hole spacing outlet: 32 mm · Hole spacing inlet: 32 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
23,30 EUR
Collection only possible with online purchase and appointment.
