Bladed 41 mm (55 ccm) cylinder kit with 12 mm piston pin, suitable for your Puch X30 Velux and X30 NG-2AH moped / moped and with adaptations to your DS, MV, MS, VZ (EX50) small motorcycle
The timing was kept rather low on the cylinder, which is characterized by a very nice torque in the lower speed range.
Details:
Cast iron reproduction cylinder with Ø 41.0 mm bore
Slot-controlled
Ø 19 mm intake, 32 mm stud spacing
Optimized overflow channels
Improved timing
No need for spindling of the engine housing (Ø cylinder neck 45.0 mm)
Ø 25 mm outlet, 42 mm stud bolt spacing
Hole pattern stud bolt: 44 x 44 mm
Incl. Ø 41 mm piston from the Italian manufacturer -GOL-
Notes:
For Puch Velux engines, the slot on the housing no longer needs to be cast on thanks to the large sealing surface.
For ZA50-G engines, the housing may need to be spindled on.
The cylinder kit can also be used on DS, MV, MS, VZ (EX50) engines, provided the housing is spindled on.
Corresponding accessories such as gaskets, cylinder head, exhaust system etc. can be found in the accessories section.
Made by the BADASS brand.
Details
Nominal diameter | 41 mm |
Manufacturer | BAD ASS |
Camouflaged | No |
Area of application | Tuning |
Material | Gray cast iron |
Surface | sandblasted |
Ø piston pin (B) | 12 mm |
Ø cylinder neck | 44.9 mm |
Ø outlet inside | 25 mm |
Ø Inlet inside | 19 mm |
Number of fixing points | 4 pcs |
Thread inlet | M6x1 (standard thread) |
Hole spacing outlet | 42 mm |
Hole spacing inlet | 32 mm |
Outlet type | straight |
Thread outlet | M6x1 (standard thread) |
Hole pattern [mm] | 44 x 44 |
Decompressor | No |
Suitable for the following models
Puch | ZA50 (fan-cooled) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 32 mm · Area of application: Tuning
141,90 EUR
swiing resonance exhaust set Ø 28 / 70 mm | Puch X30 Velux
Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 70 mm · Ø Internal connection: 28 mm · Total length: 730 mm · Mounting type: Screwed clamp · Exhaust type: Cigar · Flame tube attachment: Flange
173,10 EUR
swiing® revival stud bolt set M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Diameter: 6 mm · Material: Steel · Surface: galvanized (blue) · Total length: 30 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Width across flats SW: 10 mm · Thread length: 12 mm · Strength class: 8 · Strength class: 10.9
12,20 EUR
GOL piston 41 mm BAD ASS Lucifer | Puch X30 Velux, NG-2AH
Manufacturer: BAD ASS · Nominal diameter: 41 mm · Ø outside piston (A): 40.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.4 mm · Curvature (D): 2.4 mm · Total piston height (E): 48.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston weight: 86 g
80,70 EUR
GPO cylinder gasket set BAD ASS Lucifer / GPO Sombrero 41 mm | Puch X30 Velux, M50, MS
Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Number of components: 4 pcs · Ø cylinder: 41 mm · Ø outlet inside: 27 mm · Hole spacing inlet: 32 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Hole spacing outlet: 32 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
23,00 EUR
GPO Ø 41 mm "Sombrero" cylinder kit | Puch X30 Velux, NG-2AH
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Displacement: 57 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 44.7 mm · Ø outlet inside: 25 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
230,80 EUR
Moped fans like you also bought:
swiing® ingenious flame tube 28 mm chrome | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø inside: 25 mm · Ø outside: 28 mm · Total length: 380 mm · Color: Chrome · Mounting type: Stud bolts & nuts · Number of fixing points: 2 pcs · Hole spacing outlet: 42 mm
46,10 EUR
swiing® ingenious 15 mm carburetor tuning camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Area of application: Tuning
92,30 EUR
swiing® ingenious 15 mm carburetor set camouflaged | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Air filter connection: 23 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 32 mm · Area of application: Tuning
141,90 EUR
swiing® ingenious clutch spring reinforced +20% (Version 2.0) | Puch Z50
Spring design: Pressure spring · Ø wire: 4.6 mm · Ø inside: 30 mm · Ø outside: 39 mm · Total length: 20.5 mm · Color: blue · Manufacturer: swiing® ingenious parts · Number of components: 1 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
27,50 EUR
GPO cylinder gasket set BAD ASS Lucifer / GPO Sombrero 41 mm | Puch X30 Velux, M50, MS
Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Number of components: 4 pcs · Ø cylinder: 41 mm · Ø outlet inside: 27 mm · Hole spacing inlet: 32 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Hole spacing outlet: 32 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
23,00 EUR