38 mm racing cylinder from Airsal suitable for various Puch mopeds
.The cylinder delivers good performance at a low price.
The cooling fins are slightly larger than on the original cylinders, thus providing better cooling.
Details
Material | Cast aluminum |
Number of fixing points | 4 pcs |
Manufacturer | Airsal |
Camouflaged | No |
Surface | sandblasted |
Displacement | 50 ccm |
Crankshaft stroke | 43 mm |
Nominal diameter | 38 mm |
Ø cylinder neck | 48 mm |
Hole spacing inlet | 38 mm |
Inlet window | 24 / 20 x 14 |
Area of application | Tuning |
Ø outlet inside | 22 mm |
Thread inlet | M6x1 (standard thread) |
Ø piston pin (B) | 12 mm |
Hole spacing outlet | 42 mm |
Outlet type | straight |
Thread outlet | M6x1 (standard thread) |
Hole pattern [mm] | 44 x 44 |
Decompressor | Yes |
Suitable for the following models
Puch | E50 ZA50 (Fahrtwindgekühlt) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Total length: 135 mm · Area of application: Standard · Material: Aluminum · Width: 125 mm · Surface: sandblasted · Ø cylinder: 38 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Height: 55 mm
37,10 EUR
Airsal piston 38 mm | Puch
Manufacturer: Airsal · Thick piston ring: 1.6 mm · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.3 mm · Curvature (D): 3.8 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Nominal diameter: 38 mm · Piston ring height: 1.5 mm
49,50 EUR
Not in stock
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Width: 14.2 mm · Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony Spare part no.: A4222 · Tomos spare part no.: 035548 · Alternative version of Sachs spare part no.: 0232 157 001
13,40 EUR
Moped fans like you also bought:
Clutch 3-jaw (aluminum) | Puch E50
Area of application: Original · Area of application: Standard · Material: Aluminum · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.9 mm
56,20 EUR
swiing® revival snap ring low control bearing set (version 2.0)
Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Height: 7 mm · Thickness: 0.6 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
2,80 EUR
Starter cable Puch Maxi Ø 1.5 mm x 160 cm
Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Ø nipple: 8 mm · Nipple length: 12 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs · Cable length: 1600 mm
3,15 EUR
GPO cylinder stud bolt set special M6x106 mm galvanized | Puch
Manufacturer: GPO · Material: Steel · Surface: blue galvanized · Total length: 106 mm · Drive: External hexagon · Diameter: 7 mm · Strength class: 10 · Strength class: 10.9 · Thread length: 15 mm · Thread length: 19 mm · Width across flats SW: 10 mm · Thread type: M6x1 (standard thread) · Alternative version of the Puch spare part no.: 360.1.10.034.1
22,30 EUR