Tested sheet metal decals for the tank on your Puch Maxi moped / moped.
The stickers shimmer like gold, shining with their old and tinny appearance.
Note: The area to be covered should be free of grease and dirt in order to provide a firm hold for the adhesive.
Price per pair.
Corresponding cleaning cloths can be found along with other decals in the accessories section.
Original Puch spare part number: 349.3.20.837.0
Details
| Material | Plastic |
| Color | goldbronze |
| Place of use | Tank (+ frame) |
| Width | 204 mm |
| Rear side texture | Adhesive |
| Height | 29 mm |
| Border | contour cut |
Suitable for the following models
| Puch |
Accessories & related products
Tank sticker "PUCH maxi S" 204 x 29 mm | Puch Maxi S
Place of use: Tank (+ frame) · Color: Chrome · Color: black · Color: green · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Border: Chrome surround · Width: 204 mm · Height: 29 mm · Puch spare part no.: 349.2.20.537.0
9,60 EUR
Tank sticker "PUCH maxi N" 204 x 29 mm | Puch Maxi N
Place of use: Tank (+ frame) · Color: Chrome · Color: black · Color: green · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Width: 204 mm · Height: 29 mm · Puch spare part no.: 349.2.20.537.0
11,20 EUR
Moped fans like you also bought:
Hot 
Wippermann drive chain No.18 (double reinforced)
Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Chain type: 415H · Color: gray · Number of chain links: 114 pcs · Chain pitch: 1/2" x 3/16" · Chain lock type: Spring lock · Rolling circumference: 1448 mm · Ø bore: 4.2 mm · Ø Pin: 4.15 mm
38,20 EUR
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Width across flats SW: 10 mm · Total length: 106 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch spare part no.: 360.1.10.034.1
8,35 EUR
Cable set cut with adjusting screws | Puch Maxi
Manufacturer: Made in Germany · Material: Brass · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 1120 mm · Outer shell length: 1150 mm · Outer shell length: 1740 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1200 mm · Total length: 1250 mm · Total length: 1450 mm · Total length: 1830 mm · Color: black
39,30 EUR
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Thread type: MF12x1 (fine pitch thread) · Width across flats SW: 19 mm · Ø shaft: 11.9 mm · Ø outside: 11.8 mm · Shank length: 100 mm · Total length: 185 mm · Thread length: 26 mm · Thread length: 52.5 mm
16,80 EUR
swiing® ingenious clutch spring reinforced +20% (Version 2.0) | Puch Z50
Spring design: Pressure spring · Ø wire: 4.6 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: blue · Ø inside: 30 mm · Ø outside: 39 mm · Total length: 20.5 mm · Number of components: 1 pcs · Area of application: Tuning
26,80 EUR
GPO sprocket 9 - 21 teeth wide | Puch
Manufacturer: GPO · Material: Steel · Surface: Hardened · Chain type: 415H · Recording type: Interlocking · Chain pitch: 1/2" x 3/16" · Number of teeth: 9 pcs · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Number of teeth: 19 pcs · Number of teeth: 20 pcs · Number of teeth: 21 pcs · Total thickness: 4.6 mm
9,00 EUR
Collection only possible with online purchase and appointment.
