Grey plastic fuel filler cap with 30 mm plug closure suitable for your Puch Maxi N moped / moped
The Puch logo is molded into the top of the fuel filler cap. There is a small hole for venting so that there is no negative pressure in the tank.
Note: When the fuel filler cap is first fitted, it is not yet fully seated. The plastic swells after 1 - 2 days due to the fuel vapors and ensures a tight fit on the tank.
Alternative sealing plugs can be found in the accessories section.
Alternative to the original Puch spare part number: 349.1.22.020.1
Details
| Material | Plastic |
| Color | gray |
| Fuel filler cap | Plug 30 mm |
| Lockable | No |
| Vented | Yes |
| Ø External head | 47.1 mm |
| Ø outside connection piece | 30 mm |
| Height | 36.9 mm |
| Puch OEM number | 349.1.22.020.1 |
Suitable for the following models
| Puch |
Accessories & related products
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Drive: External hexagon · Drive: Slot · Ø Cable bushing: 2.3 mm · Ø outside: 8 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Total length: 15 mm · Width across flats SW: 7 mm · Thread type: M6x1 (standard thread) · Thread length: 7 mm · Area of application: Standard
2,95 EUR
Oil filler plug with sealing ring | Puch Maxi
Material: Steel · Surface: galvanized (blue) · Thread type: M10x1.5 (standard thread) · Drive: Slot · Screw head: Lens head · Total length: 14.6 mm · Thread length: 6 mm · Ø External head: 14 mm · Number of components: 2 pcs · Puch OEM number: 364.1.10.660.1
4,10 EUR
Not in stock
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Nipple length: 10 mm · Area of application: Standard · Number of components: 1 pcs
2,80 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm
11,60 EUR
Dell'Orto 16/16 SHA carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Color: black · Width: 72 mm · Carburetor type: SHA (type 4) · Total length: 82 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Nominal diameter: 16 mm · Ø Internal connection: 19 mm · Ø without reducing sleeve: 21 mm · Nozzle size: 82 · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Height: 111 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Mounting type: Plug connection clamped · Area of application: Tuning · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Camouflaged: No
81,90 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Thread type: M4x0.7 (standard thread) · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Drive: Slot · Ø outside: 5 mm · Total length: 6 mm · Screw head: Lens head · Thread length: 4 mm · Number of components: 2 pcs
2,35 EUR
Collection only possible with online purchase and appointment.
