Complete, true-to-original 22 mm exhaust system with stop mount suitable for your Puch X30 NS / NL, Tigra Pionier P30-74 and Allegro APN moped / moped with manual Z50 engine.
This high-quality 2-piece exhaust system will make the hearts of nostalgic fans beat faster. Modeled on the original down to the smallest detail, every owner of X30 Sport models will shed tears of joy while the corners of their mouths tilt skywards. What's more, thanks to the engraved Puch number and the Puch logo, you're sure to be jumping for joy in your garage.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Ø Silencer | 54.5 mm |
| Ø outside | 59 mm |
| Total length | 890 mm |
| Ø Flame tube outside | 22 mm |
| Number of fixing points | 4 pcs |
| Exhaust type | Flute |
| Flame tube attachment | Flange |
| Mounting type | Welded lug, Stud bolts & nuts |
| Puch OEM number | 321.1.16.100.0 |
Suitable for the following models
| Puch | Z50 (X30 Sport) |
Accessories & related products
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Material: Steel · Surface: chrome-plated · Manufacturer: swiing® ingenious parts · Color: Chrome · Total length: 910 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Ø Silencer: 54.5 mm · Ø outside: 59 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Flame tube attachment: Flange
175,70 EUR
swiing® revival flame tube 22 mm | Puch X30 Sport (Z50)
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø inside: 20 mm · Ø outside: 22 mm · Total length: 865 mm · Mounting type: Stud bolts & nuts · Flame tube attachment: Stud bolts & nuts · Number of fixing points: 2 pcs · Nominal diameter (thread): 7 mm · Thread type: M7x1 (standard thread) · Hole spacing outlet: 42 mm · Puch OEM number: 321.1.16.101.2 · Puch OEM number: 349.2.16.014.1
58,50 EUR
Hot
swiing® revival exhaust 22 mm original 2-piece | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Ø outside: 59 mm · Total length: 910 mm · Color: Chrome · Ø Silencer: 54.5 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Flame tube attachment: Flange · Puch OEM number: 349.1.16.000.0
175,70 EUR
Moped fans like you also bought:
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 50 mm · Mounting type: Union nut
26,80 EUR
Handlebar stem 30 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Ø outside: 22 mm · Clamping diameter: 25 mm · Mounting type: Front boom mounting · Length handlebar ends: 150 mm · Width: 680 mm · Height: 270 mm · Crossbar: Yes · Color: Chrome
38,50 EUR
swiing® revival 17" rear fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Sprinter
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Total length over ends: 635 mm · Scope: 1005 mm · Wide mudguard profile: 80 mm · Mounting type: Screws · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 320 mm
81,90 EUR
Hot
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Material: Aluminum · Carburetor type: SRE · Total length: 66 mm · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Width: 50 mm · Area of application: Tuning
93,70 EUR
swiing® ingenious bottom bracket bushing brass | Puch Maxi, X30 Sport, Velux, NG-2AH
Manufacturer: swiing® ingenious parts · Material: Brass · Surface: blank · Color: bronze · Bearing type: Plain bearing · Ø inside: 16.1 mm · Ø outside: 20 mm · Ø Bundle: 23.9 mm · Total length: 19 mm · Puch OEM number: 349.1.42.005.1
11,60 EUR
Collection only possible with online purchase and appointment.
