Foot gasket for the blower-cooled 40 mm racing kit suitable for Puch X30 Velux and Puch X30 NG-2AH mopeds
Thickness of the foot gasket: 0.45 mm
Material: Oil paper
Note: This cylinder gasket is perfect for the 40 mm tuning cylinders in the accessories.
If you are running a 40 or 41 mm cast iron cylinder, you can also use the base gasket 20531, which offers a little more sealing surface around the overflow channels.
Attention: With Velux engines, the small slit in the sealing surface must be cast onto the cylinder so that the cylinder kit is tight.
We recommend using Wekem 2K liquid metal for this purpose. You can find this and other selected products in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
Details
Place of use | Cylinder base |
Manufacturer | swiing® revival parts |
Material | Oiled paper |
Ø cylinder | 40 mm |
Thickness | 0.45 mm |
Suitable for the following models
Puch | ZA50 (Gebläsegekühlt) Z50 (X30 Velux) 2-Gang MS, MV, MV50 3-Gang VSD, DS, VZ, MC |
Accessories & related products
WEKEM 2K liquid metal
Manufacturer: WEKEM · Material to be used: Aluminum · Material to be used: Ceramics · Material to be used: Metal · Material to be used: Steel · Material to be used: Wood · Contents [ml]: 24 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Color: gray · Area of application: Chemistry · Temperature resistance (min.): -20 - 80 °C · Type of application: 2K · Alignment time: 240 sec
22,40 EUR
448,00 EUR/kg
Piston 40 mm (10 mm KoBo) | Puch X30 Velux fan-cooled
Nominal diameter: 40 mm · Ø outside piston (A): 39.95 mm · Ø piston pin (B): 10 mm · Compression height (C): 23.6 mm · Curvature (D): 3.4 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Piston ring height: 2 mm
54,00 EUR
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Area of application: Tuning · Number of components: 4 pcs · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing inlet: 38 mm
10,00 EUR
Airsal 40 mm cylinder kit 12 mm KoBo | Puch X30 Velux, NG-2AH
Nominal diameter: 40 mm · Manufacturer: Airsal · Material: Cast aluminum · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Hole spacing inlet: 32 mm · Ø cylinder neck: 42.8 mm · Ø Inlet inside: 15.6 mm · Ø outlet inside: 22 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Decompressor: No · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44
189,70 EUR
Moped fans like you also bought: