Set of clamping shells for mounting the handlebars on the fork plate of original and reproduction forks of various Puch mopeds / mopeds.
External dimensions (lxwxh): 47 x 17 x 26 mm
Hole spacing: 30 mm
Hole diameter: 7.3 mm
Material: aluminium, black anodized
Matching fastening screws, fork clamps and other fastening clamps can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Surface | anodized |
| Color | black |
| Total length | 47 mm |
| Width | 17 mm |
| Height | 26 mm |
| Ø mounting hole | 7.3 mm |
| Hole spacing | 30 mm |
| Number of fixing points | 2 pcs |
Suitable for the following models
| Puch |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Contents [ml]: 10 ml · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
25,60 EUR
2 560,00 EUR/l
Screw M7x40 cylinder head Allen key galvanized (clamping bridge)
Manufacturer: Made in Italy · Material: Steel · Surface: galvanized (blue) · Thread type: M7x1 (standard thread) · Thread length: 40 mm · Drive: Hexagon socket · Screw head: Cylinder head · Width across flats SW: 6 mm · Shank: No · Strength class: 8.8
2,80 EUR
Hot 
66HEROES Clamping bridges aluminum black | Puch
Manufacturer: 66HEROES · Material: Aluminum · Surface: anodized · Color: black-matt · Hole spacing: 30 mm · Number of fixing points: 2 pcs · Clamping diameter: 22 mm · Ø mounting hole: 7.3 mm · Total length: 49 mm · Width: 22 mm · Height: 26 mm
33,80 EUR
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm · Drive: Slot
2,35 EUR
swiing® revival screw M7x35 clamping bridge | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Total length: 41.6 mm · Thread type: M7x1 (standard thread) · Area of application: Standard · Ø External head: 10.5 mm · Thread length: 34.6 mm · Drive: Hexagon socket · Shank: No · Width across flats SW: 5 mm · Screw head: Cylinder head · Strength class: 8.8
3,40 EUR
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm · Thread type: M5x0.8 (standard thread)
15,10 EUR
Handlebar fork plate 30 cm curved black
Manufacturer: Made in Portugal · Material: Steel · Surface: varnished · Color: black · Clamping diameter: 22 mm · Fork plate holder length: 75 mm · Ø outside: 22 mm · Length handlebar ends: 145 mm · Crossbar: No · Mounting type: Fork plate · Width: 610 mm · Height: 300 mm
45,40 EUR
GPO steerer tube nut M26x1 closed fork plate chrome
Height: 13.8 mm · Manufacturer: GPO · Area of application: Standard · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Thread type: MF26x1 (fine pitch thread) · Drive: External hexagon · Width across flats SW: 30 mm · Thread depth: 12 mm · Ø outside: 28.9 mm · Ø outside: 36.4 mm
11,60 EUR
Screw M7x40 cylinder head Allen key galvanized (clamping bridge)
Manufacturer: Made in Italy · Material: Steel · Surface: galvanized (blue) · Thread type: M7x1 (standard thread) · Thread length: 40 mm · Drive: Hexagon socket · Screw head: Cylinder head · Width across flats SW: 6 mm · Shank: No · Strength class: 8.8
2,80 EUR
Collection only possible with online purchase and appointment.
