Complete, high-quality cable set suitable for your Piaggio Ciao moped / moped.
This nostalgic complete cable set in vintage look in grey color is intended for the PX model, but also fits easily on the last model C24.
The cable sleeves are already cut to the correct length with the original handlebars and fitted and crimped with end sleeves. The inner cables (except the deco cable) have been designed so that they can be re-cut to simplify installation.
The cable set contains the following components:
1 pc. Gas cable (inner cable with round nipple 164 cm, Ø 1.25 mm / cable length 107 cm)
1 pc. Deco cable (inner cable with cylindrical nipple on both sides 90 cm, Ø 1.25 mm / cable length 84 cm)
1 pc. Front brake cable (inner cable with round nipple 156 cm, Ø 1.80 mm / cable length 105 cm)
1 pc. Rear brake cable (inner cable with round nipple 200 cm, Ø 1.80 mm / cable length 115 cm)
Note: The difference to the cable set for the older P and SC models is the decompression cable. On the P and SC models, a ball was fitted on one side and a barrel (transverse) on the other as standard. The PX had barrels (transverse) on both sides (due to the newer grip sets - with brake and decompression levers made of plastic or solid cast iron).
Further cable set versions and the originally intended grip set can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Alternative for the original Piaggio spare part numbers: 103217, 103209, 103220, 104080
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Quantity | 4 pcs |
| Ø Stranded wire | 1.25 mm, 1.8 mm |
| Outer shell length | 1070 mm, 840 mm, 1050 mm, 1150 mm |
| Color | gray |
| Total length | 1640 mm, 900 mm, 1560 mm, 2000 mm |
| Nipple shape | Ball, Barrel (transverse) |
| Piaggio spare part no. | 103217, 103209, 103220, 104080 |
Suitable for the following models
| Piaggio | Ciao - Ciao, Ciao |
Accessories & related products
Cable set black matt | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears
22,40 EUR
swiing® revival cable set cut gray old model | Piaggio Ciao P, SC
Manufacturer: swiing® revival parts · Material: Steel · Color: gray · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.8 mm · Total length: 890 mm · Total length: 1560 mm · Total length: 1650 mm · Total length: 2000 mm · Outer shell length: 840 mm · Outer shell length: 1050 mm · Outer shell length: 1070 mm · Outer shell length: 1150 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse)
25,80 EUR
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Color: silver · Thread type: M5x0.8 (standard thread) · Total length: 145 mm · Width: 105 mm · Height: 5.3 mm · Thread length: 8 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Ø mounting hole: 5 mm
12,30 EUR
swiing® revival snap ring low control bearing set (version 2.0)
Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Height: 7 mm · Sachs spare part no.: P0521 · Puch spare part no.: 349.1.30.015.1
2,80 EUR
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
11,20 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Thread length: 4 mm · Number of components: 2 pcs
2,25 EUR
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Bearing type: Plain bearing · Manufacturer: swiing® revival parts · Material: Nylon · Color: black · Surface: blank · Total length: 19 mm · Ø Bundle: 24.1 mm · Ø outside: 20.2 mm · Ø inside: 16.2 mm · Puch spare part no.: 349.1.42.005.1
2,80 EUR
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,20 EUR
24,89 EUR/l
Collection only possible with online purchase and appointment.
