The high-quality 38 mm (50 cc) racing cylinder kit is now also available exclusively with «Vertex» pistons.
Fits Puch Maxi, X30 Sport NS/NL, X30 Sport NG-2A and Supermaxi.
Vertex pistons are world-renowned for their quality and design.
In terms of appearance, this racing cylinder is indistinguishable from the original. The cast-in «CH12» and original-sized cooling fins ensure optimum protection from the race control.
Exhaustive instructions for correct installation and running-in are included.
This racing kit should preferably be used with a 22 mm exhaust (2-bend) or 22 mm manifold so that the exhaust gases can also be removed and no heat build-up occurs.
&p>Revised version: The sealing surfaces of the inlet and outlet have been enlarged so that a large 28 mm flame tube can also be fitted without any problems. There is also no more piston protrusion and the cylinder has been adapted accordingly. Last but not least, the inlet gasket has also been reworked.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
Manufacturer | swiing® revival parts, Vertex |
Area of application | Tuning |
Surface | sandblasted |
Displacement | 50 ccm |
Crankshaft stroke | 43 mm |
Ø piston pin (B) | 12 mm |
Ø cylinder neck | 48 mm |
Hole spacing inlet | 38 mm |
Nominal diameter | 38 mm |
Ø outlet inside | 20 mm |
Inlet window | 24 / 21 x 15 |
Thread inlet | M6x1 (standard thread) |
Hole spacing outlet | 42 mm |
Hole pattern [mm] | 44 x 44 |
Outlet type | straight |
Number of fixing points | 4 pcs |
Thread outlet | M6x1 (standard thread) |
Decompressor | Yes |
Camouflaged | Yes |
Alternative version of the Puch spare part no. | 349.7.10.105.0 |
Suitable for the following models
Puch | E50 ZA50 (Fahrtwindgekühlt) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Total length: 135 mm · Width: 125 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Ø cylinder: 38 mm · Surface: sandblasted · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Height: 55 mm · Decompressor: No
37,10 EUR
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Number of components: 4 pcs · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Standard
8,35 EUR
swiing® revival piston 38 mm Vertex | Puch
Manufacturer: Vertex · Manufacturer: swiing® revival parts · Ø outside piston (A): 37.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.45 mm · Curvature (D): 3.5 mm · Total piston height (E): 50.45 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 1.5 mm · Thick piston ring: 1.6 mm · Tolerance group: A · Weight: 71 g
67,50 EUR
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Total length: 135 mm · Width: 125 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Ø cylinder: 38 mm · Surface: sandblasted · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Height: 55 mm · Decompressor: No
37,10 EUR
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Area of application: Gearbox lubrication with clutch · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,20 EUR
24,89 EUR/l
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: raw · Tension: 6 V · Width: 27 mm · Performance: 50 W · Type of current: Alternating current (AC) · Height: 15 mm · Total length: 50 mm · Ø mounting hole: 6 mm · Mounting type: Screws
33,70 EUR
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Material: Aluminum · Area of application: Tuning · Nominal diameter: 15 mm · Carburetor type: SRE · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Total length: 66 mm · Mixed oil connection: No · Width: 50 mm · Vacuum connection: No · Height: 95 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
90,10 EUR
swiing® ingenious 15 mm intake manifold camouflaged (Version 2.0) | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Total length: 46 mm · Ø inside: 15 mm · Hole spacing inlet: 38 mm · Height flange center hole: 43 mm · Total height: 53 mm · Mounting type: Screws · Ø External connection: 20 mm · Camouflaged: Yes · Area of application: Tuning · Number of fixing points: 2 pcs
39,30 EUR
swiing 15 mm carburetor set camouflaged | Puch E50
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Carburetor type: SRE · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Hole spacing inlet: 38 mm · Mounting type: Plug connection clamped · Mounting type: Stud bolts & nuts · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Area of application: Tuning · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
118,20 EUR
GPO 38 mm cylinder head Racing high-compression | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Ø screw holder: 7.4 mm · Candle thread: short · Width: 125 mm · Total length: 135 mm · Hole pattern [mm]: 45 x 45 · Decompressor: No · Height: 55 mm · Area of application: Tuning · Number of fixing points: 4 pcs
56,20 EUR