Mudguard set consisting of the front and rear mudguard made of stainless steel from the brand swiing® revival as well as a chrome-plated mudguard strut and reinforcement arch from the brand GPO for your Puch X30 NS, NL, NG-2AH, N-2AH, X30-A and Sprinter moped / moped.
The high-gloss polished surface ensures a first-class look and gives your moped the necessary shine.
As the front mudguard is folded on both sides and the rear mudguard is folded at the rear, the risk of injury is considerably reduced. Furthermore, it is still possible to use an edge protector or splash guard flap on the front mudguard. Corresponding holes must still be drilled if required.
For mounting the side and lower mudguard struts on the front mudguard, all original holes are already present.
To mount the enclosed cable guides, holes are also already present on both sides of the mudguard.
The rear mudguard has all the original mounting holes, the cut-out for the air filter and the tabs for the cable routing.
The set consists of the following individual parts:
Technical data for front mudguard:
Technical data rear mudguard:
Technical data mudguard arch:
Technical data lower strut:
When you purchase this complete set, you will receive a substantial percentage off the retail price of the individual parts.
Other parts for your wheel fairing, such as stainless steel polish or fastening material, can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
The set includes the following fixed parts:
Manufacturer: swiing® revival parts · Material: Plastic · Color: black · Total length: 74 mm · Height: 12.5 mm · Mounting type: Plug connection · Number of fixing points: 2 pcs · Hole spacing: 63 mm
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Total length: 270 mm · Distance mudguard - center hole: 212 mm, 247 mm · Ø outside: 14 mm · Outer width: 130 mm · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs · Hole spacing: 35 mm · Ø mounting hole: 5.9 mm, 6.4 mm · Wide intake: 115 mm
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 17 " · Total length: 305 mm · Distance mudguard - center hole: 300 mm · Outer width: 160 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø mounting hole: 12.5 mm
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: not folded, closed folded · Shape of the mudguard: partly round · Total length over ends: 635 mm · Scope: 1005 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 320 mm · Mounting type: Screws
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: closed folded · Shape of the mudguard: partly round · Total length over ends: 565 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 185 mm · Mounting type: Nuts & bolts
Details
Color | Chrome |
Manufacturer | swiing® revival parts, GPO |
Material | Chrome steel (stainless steel) |
Surface | chrome-plated, polished |
Folding the ends | closed folded, not folded |
Shape of the mudguard | partly round |
Mounting type | Nuts & bolts |
Wheel size [inch] | 17 " |
Suitable for the following models
Puch |
Accessories & related products
Autosol stainless steel polish 75 ml
Manufacturer: Autosol · Material to be used: Chrome steel (stainless steel) · Contents [ml]: 75 ml · Area of application: Chemistry · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous
12,30 EUR
164,00 EUR/l
swiing® revival 17" front fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Sprinter
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: closed folded · Shape of the mudguard: partly round · Total length over ends: 565 mm · Mounting type: Nuts & bolts · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 185 mm
61,90 EUR
swiing® revival 17" rear fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Sprinter
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Folding the ends: closed folded · Folding the ends: not folded · Wheel size [inch]: 17 " · Shape of the mudguard: partly round · Total length over ends: 635 mm · Scope: 1005 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 320 mm · Mounting type: Screws · Color: Chrome
78,80 EUR
Reinforcement / mudguard arch special NOS | Puch X30
Manufacturer: Puch · Material: Steel · Surface: chrome-plated · Wheel size [inch]: 17 " · Ø mounting hole: 6 mm · Number of fixing points: 4 pcs · Wide intake: 118 mm · Total length: 268 mm · Mounting type: Nuts & bolts · Hole spacing: 36 mm · Color: Chrome
42,70 EUR
Not in stock
Moped fans like you also bought:
swiing® revival snap ring low control bearing set (version 2.0)
Nominal diameter: 20 mm · Nominal diameter: 28 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Height: 7 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
2,80 EUR
swiing® revival 17" front fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Sprinter
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Color: Chrome · Wheel size [inch]: 17 " · Folding the ends: closed folded · Shape of the mudguard: partly round · Total length over ends: 565 mm · Mounting type: Nuts & bolts · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 185 mm
61,90 EUR
swiing® revival 17" rear fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Sprinter
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: polished · Folding the ends: closed folded · Folding the ends: not folded · Wheel size [inch]: 17 " · Shape of the mudguard: partly round · Total length over ends: 635 mm · Scope: 1005 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 320 mm · Mounting type: Screws · Color: Chrome
78,80 EUR
GPO front mudguard strut 17" chrome
Manufacturer: GPO · Material: Steel · Outer width: 160 mm · Surface: chrome-plated · Total length: 305 mm · Color: Chrome · Wheel size [inch]: 17 " · Distance mudguard - center hole: 300 mm · Ø mounting hole: 12.5 mm · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs
16,80 EUR
GPO mudguard arch 17" front chrome
Manufacturer: GPO · Material: Steel · Outer width: 130 mm · Surface: chrome-plated · Wheel size [inch]: 17 " · Ø outside: 14 mm · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.4 mm · Number of fixing points: 6 pcs · Wide intake: 115 mm · Total length: 270 mm · Mounting type: Nuts & bolts · Hole spacing: 35 mm · Color: Chrome
22,40 EUR