Special stud bolt for Sachs 502, 50/2, 50/3, 50/4, 503, 504 mopeds, mopeds and small motorcycles.
The cylinder is optimally guided and centered thanks to the shaft in the middle.
Due to the small key width, the nut can also be easily fitted in hard-to-reach places on the cylinder base.
The increased tensile strength compensates for the difference in thread diameter.
Length: 27 mm
Ø shank: 6.1 mm
Thread: M6 / M5
Thread length: 14 / 10 mm
Strength of stud bolt: 12.9
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | burnished |
| Diameter | 6 mm |
| Thread type | M6x1 (standard thread), M5x0.8 (standard thread) |
| Total length | 27 mm |
| Thread length | 13 mm, 10 mm |
| Strength class | 12.9 |
Suitable for the following models
| Universal | |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Contents [ml]: 10 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
24,70 EUR
2 470,00 EUR/l
swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Total length: 38 mm · Thread length: 11 mm · Thread length: 19 mm · Strength class: 10.9
2,25 EUR
swiing® revival cylinder base gasket cylinder 0.3 mm | Sachs 503
Ø inside: 45 mm · Manufacturer: swiing® revival parts · Area of application: Standard · Material: Oiled paper · Ø cylinder: 38 - 40 mm · Place of use: Cylinder base · Nominal diameter: 45 mm · Thickness: 0.3 mm · Hole pattern [mm]: 60 x 40
3,85 EUR
Not in stock
swiing stud bolt set M6 / M5 Sachs (12.9 strength) Special
Manufacturer: swiing · Material: Steel · Surface: blue galvanized · Surface: burnished · Diameter: 6 mm · Total length: 27.3 mm · Drive: External hexagon · Thread length: 9.5 mm · Thread length: 14 mm · Width across flats SW: 8 mm · Strength class: 10 · Strength class: 12.9 · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread)
21,60 EUR
Flange nut M5 galvanized (10 strength)
Material: Steel · Surface: blue galvanized · Nut type: Flange nut · Thread type: M5x0.8 (standard thread) · Drive: External hexagon · Height: 5 mm · Width across flats SW: 8 mm · Strength class: 10 · Pony spare part no.: A1501 · Sachs spare part no.: 0242 024 104
0,90 EUR
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Area of application: Gearbox lubrication with clutch · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
11,20 EUR
24,89 EUR/l
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Color: silver · Surface: blue galvanized · Total length: 34 mm · Drive: External hexagon · Thread length: 22 mm · Screw head: Hexagon · Shank: Yes · Width across flats SW: 10 mm · Number of components: 12 pcs · Ø shaft: 5.85 mm · Strength class: 10.9 · Thread type: M6x1 (standard thread) · Shank length: 8 mm
5,50 EUR
swiing® revival gasket set 38 mm cylinder | Sachs 503
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Area of application: Tuning · Ø cylinder: 38 mm · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm · Number of components: 3 pcs · Decompressor: No · Hole spacing inlet: 32 mm
12,30 EUR
Screw M6x20 cylinder head Allen key galvanized
Material: Steel · Surface: blue galvanized · Total length: 25.9 mm · Drive: Hexagon socket · Thread length: 20 mm · Screw head: Cylinder head · Ø External head: 9.9 mm · Shank: No · Width across flats SW: 5 mm · Strength class: 8.8 · Thread type: M6x1 (standard thread)
1,90 EUR
Collection only possible with online purchase and appointment.
