Grey anodized racing silent block 19.2x15 mm for mopeds, mopeds and small motorcycles with Sachs 50/2, 50/3 and 50/4 engines.
This reinforced vibration damper (19.2 x 15 mm) made of aluminium is particularly suitable for powerful engines and reduces distortion of the engine block when starting and accelerating.
The suspension bumper can be used with the original cylinder head and engine housing.
Ø outer: 19.2 mm
Ø inner: 8.5 mm
Length: 15 mm
Material: Aluminium, grey anodized
Material O-ring: NBR, petrol-resistant
Price per piece.
Note: Check the required lengths before purchasing. Depending on the frame, you will need 15 or 19 mm long aluminum spacers.
Exclusive product for the highest demands of the quality brand swiing®.
Alternative to the original Sachs spare part number: 0260 021 008
Details
Ø outside | 19.2 mm |
Total length | 15 mm |
Ø inside | 8.5 mm |
Manufacturer | swiing® ingenious parts |
Material | Aluminum, NBR |
Surface | anodized |
Thread length | 15 mm |
Area of application | Racing |
Alternative version of Sachs spare part no. | 0260 021 008 |
Suitable for the following models
Sachs | 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 |
Accessories & related products
swiing® revival Silentblock Ø 19.3 x 19 mm | Sachs 50/2 (A1940)
Manufacturer: swiing® revival parts · Material: Rubber · Material: Steel · Surface: raw · Color: black · Ø outside: 19.3 mm · Ø inside: 8.5 mm · Total length: 19 mm · Ø Bundle: 13 mm · Ø Bundle: 15 mm · Waistband height: 1.5 mm · Area of application: Standard · Pony spare part no.: A1940 · Sachs spare part no.: 0260 101 000
7,80 EUR
swiing® ingenious Silentblock Ø 19.2 x 19 mm Racing original Zylinderkopf | Sachs 50/2, 50/3
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: NBR · Surface: anodized · Area of application: Racing · Ø inside: 8.5 mm · Ø outside: 19.2 mm · Total length: 19 mm · Alternative version of the Pony Spare part no.: A1940 · Alternative version of Sachs spare part no.: 0260 101 000
14,50 EUR
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (stainless steel) · Height: 5.3 mm · Total length: 145 mm · Color: silver · Ø mounting hole: 5 mm · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs
12,30 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Manufacturer: Magura · Ø outside: 5 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm
2,25 EUR
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing cage: Brass cage ball-guided · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Bearing type: Shoulder bearing · Width: 8 mm · Ø outside: 35 mm · Ø inside: 15 mm · Ball bearing closed: No · Area of application: Standard · Pony spare part no.: A1149 · Sachs spare part no.: 0232 017 006
28,10 EUR
swiing® ingenious ball bearing pinion shaft 15.5/31.5/8 | Sachs 502 AML, 50/2 ML, 50/3, 50/4
Bearing cage: Sheet steel cage · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS1 - NBR contact seal on both sides · Material: Steel · Bearing type: Deep groove ball bearing · Ø inside: 15.5 mm · Ø outside: 31.5 mm · Ball bearing closed: Yes · Width: 8 mm
31,50 EUR
swiing® ingenious Silentblock Ø 19.2 x 19 mm Racing original Zylinderkopf | Sachs 50/2, 50/3
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: NBR · Surface: anodized · Area of application: Racing · Ø inside: 8.5 mm · Ø outside: 19.2 mm · Total length: 19 mm · Alternative version of the Pony Spare part no.: A1940 · Alternative version of Sachs spare part no.: 0260 101 000
14,50 EUR