Intake manifold and air filter for Sachs mopeds, mopeds and small motorcycles with 50/2 (502), 50/3 or 50/4 engine.
The very short intake path in combination with the 15 mm Bing carburetor leads to a considerable increase in performance. If the amount of air drawn is still too large, you can use item 17273 as an insert.
Installation note! – As the space between the cylinder, engine block and frame is very tight, the following must be observed during installation:
- The stud bolts from the cylinder must be removed. The M5x12 bolts to be used are included.
- The «swiing» lettering on the intake manifold must face upwards, as the flange of the manifold has a slight angle.
- The chamfered surface of the air filter housing must face downwards.
- The manifold, carburettor and air filter must be pre-assembled. Only then can the entire assembly be used.
Scope of delivery as per image 1.
Exclusive product for the highest demands of the quality brand swiing®.
The set includes the following fixed parts:
Manufacturer: swiing® ingenious parts · Camouflaged: No · Color: gray · Material: Aluminum · Filter type: Grille · Total length: 29 mm · Length of filter section: 9.5 mm · Ø Internal connection: 20 mm · Ø outside: 56 mm · Mounting type: Screws, Bride · Area of application: Tuning
Manufacturer: swiing® ingenious parts
Details
| Manufacturer | swiing® ingenious parts |
| Number of fixing points | 2 pcs |
| Material | Aluminum |
| Surface | anodized |
| Area of application | Tuning |
| Color | black-matt |
| Ø inside | 15 mm |
| Ø External connection | 20 mm |
| Mounting type | Screws |
| Hole spacing inlet | 31 mm |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 PS, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Moped fans like you also bought:
GPO blade gauge set 0.05 - 1.00 mm 13 pcs.
Measuring range [mm]: 0.05 - 1 mm · Manufacturer: GPO · Material: Metal · Area of application: Measuring tool · Surface: blank / oiled · Total length: 105 mm · Thickness: 0.05 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 0.6 mm · Thickness: 0.7 mm · Thickness: 0.8 mm · Thickness: 0.9 mm · Thickness: 1 mm · Width: 13 mm · Number of components: 13 pcs
13,40 EUR
swiing nozzle set M3.5 (44 - 54) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Total length: 6 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5 · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54
17,90 EUR
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Drive: Slot · Screw head: Lens head · Thread length: 4 mm · Total length: 6 mm
2,25 EUR
Collection only possible with online purchase and appointment.
