Hot 
Handmade aluminum side covers for your Sachs 503 Pony Junior, Sachs 503 GT and other Sachs moped / moped models.
The side covers are of the highest quality and are an absolutely worthy alternative to the original side plates that have long been unavailable.
Every detail is almost perfectly modeled on the original. The covers can either be installed directly or painted.
Dimensions of the side panels:
Total length: 630 mm
Width: 70 mm
Distance of the mounting holes rear - center: 280 mm
Distance of the mounting holes center - front: 210 mm
To avoid any stress cracks or cracks caused by vibrations, the chain sliders should be mounted on rubber (vibration dampers).
Corresponding attachments such as clamping screw, footboard etc. can be found under accessories.
A quality product made in Switzerland.
Details
| Manufacturer | Made in Switzerland |
| Ø mounting hole | 6 mm |
| Material | Aluminum |
| Surface | blank |
| Color | silver |
| Width | 70 mm |
| Height | 145 mm |
| Total length | 630 mm |
| Number of fixing points | 6 pcs |
Suitable for the following models
| Sachs |
Accessories & related products
Hot
Rear light ULO | Sachs, Puch
Test mark: none · Material: Aluminum · Color: Chrome · Material: Steel · Color: red · Tension: 6 V · Width: 57 mm · Bulb holder: E10 · Height: 90 mm · Number of fixing points: 2 pcs · Ø Receptacle: 5 mm · Depth: 55 mm · Mounting type: Nuts & bolts · Battery operated: No
66,20 EUR
Not in stock
Moped fans like you also bought:
GPO license plate holder Inox
Width: 105 mm · Height: 5.3 mm · Manufacturer: GPO · Material: Chrome steel (stainless steel) · Thread type: M5x0.8 (standard thread) · Color: silver · Ø mounting hole: 5 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Total length: 145 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs
12,30 EUR
Magura set screw M6x34 mm lock nut SW8
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Ø cable holder: 3.05 mm · Thread type: M6x1 (standard thread) · Slotted: No · Total length: 34 mm · Width across flats Screw: 8 mm · Thread length: 24 mm · Ø Receptacle: 7.05 mm · Width across flats nut: 8 mm
2,80 EUR
swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: blue galvanized · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Thread type: MF10.5x1 (fine pitch thread) · Total length: 175 mm · Thread length: 34 mm · Thread length: 45 mm
26,90 EUR
Continental 2.00 - 2.50 x 17" tube
Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Wheel size [inch]: 17 " · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Tire height [%]: 100 · Valve type: TR6 car valve
16,80 EUR
Magura cable clamp Sachs shift/clutch arm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Ø Cable bushing: 2.8 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Ø outside: 7 mm · Ø Bundle: 7 mm · Width across flats SW: 6 mm · Ø shaft: 4 mm · Thread type: M4x0.7 (standard thread) · Total length: 11 mm · Thread length: 7 mm · Number of components: 2 pcs
2,80 EUR
Clamps, nipples & set screws set 73 pcs.
Storage method: Plastic box · Manufacturer: Made in Germany · Number of components: 73 pcs · Material: Brass · Material: Steel · Surface: blue galvanized · Surface: nickel-plated · Surface: raw · Drive: External hexagon · Drive: Knurled screw · Drive: Slot · Screw head: Hexagon · Dimension storage box: 18.5 x 11.0 x 1.8 cm
67,50 EUR
Collection only possible with online purchase and appointment.
