"RACING" sticker with black lettering, for the top of the tank of Puch X30 NG-2AH mopeds.
Also suitable for Puch X30 NS/NL mopeds.
Dimension: 105 x 67 mm
This is a high-quality sticker that is petrol and UV-resistant.
We recommend preparing the area to be covered with a degreasing cleaning cloth to give the stickers a firm hold.
You can find this in the accessories section.
Details
| Width | 105 mm |
| Height | 67 mm |
| Place of use | Tank (+ frame) |
| Rear side texture | Adhesive |
| Consistency | UV-resistant, petrol resistant |
Suitable for the following models
| Puch |
Moped fans like you also bought:
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Thickness: 4.5 mm · Color: black · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Ø mounting hole: 6.7 mm · Number of fixing points: 6 pcs · Ø inside: 94 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Hole spacing: 36.5 mm
23,30 EUR
EBR fork reinforced black | Puch
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black · Thread type: MF26x1 (fine pitch thread) · Adjustable: No · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Ø spars: 28 mm · Head tube length: 180 mm · Thread length: 57 mm · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm · Total length: 580 mm
154,70 EUR
Spotlight round Ø 13 cm chrome / black
Width: 134 mm · Height: 147 mm · Material: Sheet metal (steel) · Test mark: none · Bulb holder: BA15d · Housing material: Metal · Surface: chrome-plated · Surface: varnished · Area of application: Standard · Lens material: Plastic · Ø outside: 130 mm · Color: Chrome · Color: black · Color: transparent · Speedometer recording: None · Switch included: No · Battery operated: No · Depth: 80 mm · Thread size: M6 · Mounting type: Screws · Number of fixing points: 2 pcs
29,20 EUR
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Nominal diameter: 19 mm · Material: Aluminum · Camouflaged: No · Carburetor type: PHBG CS · Color: black · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mounting type: Plug connection clamped · Ø Internal connection: 24 mm · Total length: 82 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Width: 70 mm · Area of application: Racing · Area of application: Tuning · Mixed oil connection: Yes · Height: 124 mm · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 75 · Size of secondary nozzle: 45
140,60 EUR
Collection only possible with online purchase and appointment.
