Blue anodized vibration dampers for your moped, moped and small motorcycle.
The vibration dampers fit into various handlebars with an inner diameter of 17 to 21 mm.
The black plastic pin is pressed apart by tightening the Allen screw until it is optimally braced with the handlebars.
The low additional weight at the end of the handlebars reduces the occurrence of vibrations.
Total length: 66 mm
Cone length: 30 mm
Ø outside: 21.7 mm
Ø at the tip: 12.6 mm
Material: aluminium
Surface: anodized
The scope of delivery corresponds to a pair (2 pieces).
Alternative bar end plugs and various handlebars can be found in the accessories section.
Branded product from the manufacturer Power ONE Racing.
Details
| Manufacturer | Power1 |
| Total length | 66 mm, 30 mm |
| Material | Aluminum |
| Surface | anodized |
| Color | blue |
| Ø inside | 17 - 21 mm |
| Number of components | 2 pcs |
| Ø outside | 21.7 mm |
| Clamping diameter | 22 mm |
Accessories & related products
STR8 racing handlebar fork plate 7 cm / narrow aluminum blue
Ø outside: 22 mm · Manufacturer: STR8 · Material: Aluminum · Surface: anodized · Color: blue · Mounting type: Fork plate · Width: 610 mm · Clamping diameter: 22 mm · Height: 70 mm · Fork plate holder length: 50 mm · Length handlebar ends: 170 mm · Crossbar: Yes
45,00 EUR
Racing handlebar fork plate 8 cm / wide aluminum blue
Ø outside: 22 mm · Material: Aluminum · Surface: anodized · Color: blue · Mounting type: Fork plate · Width: 830 mm · Clamping diameter: 22 mm · Height: 80 mm · Fork plate holder length: 150 mm · Length handlebar ends: 235 mm · Crossbar: Yes
49,50 EUR
STR8 racing handlebar aluminum fork plate 7 cm narrow black
Ø outside: 22.1 mm · Manufacturer: STR8 · Material: Aluminum · Surface: anodized · Color: black · Mounting type: Fork plate · Width: 640 mm · Clamping diameter: 22.1 mm · Height: 70 mm · Fork plate holder length: 80 mm · Length handlebar ends: 185 mm · Crossbar: Yes
39,30 EUR
Moped fans like you also bought:
swiing nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Total length: 6 mm · Manufacturer: swiing · Material: Brass · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Quantity: 6 pcs · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5 · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64
17,90 EUR
Motorex Brake Cleaner 750 ml
Manufacturer: Motorex · Area of application: Chemistry · Area of application: Cleaner · Contents [ml]: 750 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS04 - Gas under pressure · Hazard pictogram: GHS07 - Caution dangerous
28,10 EUR
37,47 EUR/l
Collection only possible with online purchase and appointment.
