Moderate Casual 
Complete converter unit with 100 mm pulleys, suitable for your Piaggio Ciao (with adaptations), Si, Bravo and Boxer with variomatic drive.
Please note the following information:
- Pulley: Ø 100 mm, for mounting on a Piaggio Ciao, the pulley must be replaced or turned down to approx. 96 mm.
- The locking plate for the nut on the back of the pulleys should be bent over .
- If you have problems starting the moped, it is worth rubbing the collar of the torque converter with a little thinner to remove the protective coating (this can settle on the starting pads).
- Check whether the torque converter is rubbing against the gearbox cover. If this is the case, replace the shim inside if necessary.
Details
| Manufacturer | Olympia |
| Material | Steel |
| Surface | galvanized (blue), burnished |
| Gearbox type | Vario |
| Number of jaws | 3 pcs |
| Number of springs | 3 pcs |
| Angle pulley | 17 ° |
| Thickness | 74 mm |
| Ø outside | 100 mm |
| Hardness level Counter pressure spring | Standard (30 kg - steel-colored) |
| Weight | 1930 g |
Suitable for the following models
| Piaggio | Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
Oil seal NBR 18/24/4 A Vario clutch hub original | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Width: 4 mm · Ø inside: 18 mm · Ø outside: 24 mm
7,65 EUR
Oil seal NBR 12/19/3 A original Vario clutch hub | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Width: 3 mm · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Ø outside: 19 mm · Ø inside: 12 mm · Piaggio spare part no.: 008766
6,90 EUR
Hot 
Malossi Fly Clutch converter Vario Ø 102 mm | Piaggio SI, Bravo, Boxer
Manufacturer: Malossi · Material: Steel · Weight: 1170 g · Gearbox type: Vario · Ø outside: 102 mm · Angle pulley: 15 ° · Number of jaws: 3 pcs · Number of springs: 3 pcs · Hardness level Counter pressure spring: Level 2 (35 kg - yellow / blue / black)
225,30 EUR
GPO converter with swiing® pulleys Ø 96 mm | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Manufacturer: swiing® ingenious parts · Gearbox type: Vario · Ø outside: 96 mm · Hardness level Counter pressure spring: Standard (30 kg - steel-colored) · Alternative version of Piaggio spare part no.: 104649 · Alternative version of Piaggio spare part no.: 221171
202,80 EUR
Not in stock
GPO converter with swiing® pulleys Ø 96 mm without bell housing | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Gearbox type: Vario · Ø outside: 96 mm · Hardness level Counter pressure spring: Standard (30 kg - steel-colored) · Piaggio spare part no.: 104649 · Piaggio spare part no.: 221171 · Alternative version of Piaggio spare part no.: 104649 · Alternative version of Piaggio spare part no.: 221171
169,00 EUR
Not in stock
Moped fans like you also bought:
swiing® revival locking plate nut Variomatic Inox | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: blank · Area of application: Original · Area of application: Standard · Number of lobes: 1 pcs · Ø inside: 8.15 mm · Ø outside: 33.5 mm
3,85 EUR
Collection only possible with online purchase and appointment.
