Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted in five stages thanks to the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 46 mm
Holt diameter: 24 mm
Bush diameter for mounting: 10 / 8 mm
The diameter can be shortened from 10 mm to 8 mm at the mounting points using the plastic bushes supplied.
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery includes one pair.
Rear springs in other colors, the matching adjustment key, washers and fastening material can be found in the accessories section.
Suspension strut from the MKX-SHOCK brand.
Details
| Ø outside | 46 mm |
| Total length | 300 mm |
| Manufacturer | MKX |
| Material | Steel, Aluminum |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø Fastening inside | 8 mm, 10 mm |
| Ø spars | 24 mm |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Contents [ml]: 10 ml · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
24,70 EUR
2 470,00 EUR/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Color: black · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Total length: 330 mm · Ø Fastening inside: 10 mm · Ø outside: 52 mm · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts · Ø spars: 32 mm
157,70 EUR
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Material: Aluminum · Color: Chrome · Material: Steel · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Total length: 300 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø outside: 46 mm · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts · Ø spars: 24 mm
56,20 EUR
Moped fans like you also bought:
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Color: black · Surface: blue galvanized · Color: silver · Thread type: M6x1 (standard thread) · Number of teeth: 10 pcs · Total length: 175 mm · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs
11,20 EUR
Spotlight round Ø 13 cm chrome / black
Material: Sheet metal (steel) · Test mark: none · Bulb holder: BA15d · Housing material: Metal · Color: Chrome · Area of application: Standard · Color: black · Surface: chrome-plated · Color: transparent · Surface: varnished · Lens material: Plastic · Width: 134 mm · Height: 147 mm · Ø outside: 130 mm · Mounting type: Screws · Depth: 80 mm · Thread size: M6 · Switch included: No · Battery operated: No · Number of fixing points: 2 pcs · Speedometer recording: None
28,10 EUR
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: blue galvanized · Surface: raw · Thread type: M5x0.8 (standard thread) · Color: silver · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
14,50 EUR
Collection only possible with online purchase and appointment.
