Silver vintage mufflers with chrome-plated cover caps for your moped, moped and small motorcycle.
These mufflers are perfect for the old-school look.
Length (mount - mount): 300 mm
Ø outer cover sleeve: 40 mm
Ø uprights: 28 mm
Ø bushings for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushings from shifting in the event of lateral forces.
The scope of delivery corresponds to one pair.
Rear springs in other designs, fastening material and washers can be found in the accessories section.
Quality product from the Italian manufacturer IMCA.
Details
Manufacturer | IMCA |
Total length | 300 mm |
Color | Chrome |
Material | Steel, Aluminum |
Surface | chrome-plated |
Damping type | Spring |
Adjustable | Yes |
Ø spars | 28 mm |
Ø outside | 40 mm |
Ø Fastening inside | 10 mm |
Mounting type | Nuts & bolts |
Number of fixing points | 2 pcs |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
24,70 EUR
2 470,00 EUR/l
Shock absorber 36 cm chrome / black with cover cap
Ø outside: 52 mm · Ø outside: 60 mm · Color: Chrome · Color: black · Surface: chrome-plated · Mounting type: Nuts & bolts · Damping type: Spring · Adjustable: No · Ø spars: 30 mm · Total length: 360 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Number of fixing points: 2 pcs
109,80 EUR
MKX shock absorber 26 cm chrome
Total length: 260 mm · Manufacturer: MKX · Ø outside: 46 mm · Color: Chrome · Surface: chrome-plated · Mounting type: Nuts & bolts · Damping type: Spring · Adjustable: Yes · Ø spars: 24 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm
56,20 EUR
Moped fans like you also bought:
Main stand black | Puch Maxi S, P1 / X30 NS, NL, NG
Total height: 220 mm · Material: Steel · Color: black · Surface: varnished · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm
22,40 EUR
swiing® revival snap ring low control bearing set (version 2.0)
Height: 7 mm · Nominal diameter: 20 mm · Nominal diameter: 28 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: blank · Thickness: 0.6 mm · Puch spare part no.: 349.1.30.015.1 · Sachs spare part no.: P0521
2,80 EUR
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: blue galvanized · Color: silver · Total length: 18 mm · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Thread length: 12 mm · Puch spare part no.: 901.1053
3,95 EUR