Gearwheel of the primary drive for 2-speed manual Z50 engines of Puch X30 NS, NL mopeds / mopeds.
This drive wheel is used in combination with clutch pistons, which have 19 teeth.
Number of teeth: 69
Toothing: helical
Mounting: 3-prong profile
Note: There may be a slight singing after installation until the tooth flanks are ground in cleanly on the clutch basket.
The fastening nut and other parts can be found under accessories.
Original Puch spare part number: 349.3.13.200.1
Details
Manufacturer | HS-Retro |
Material | Steel |
Recording type | 3-tooth splined shaft holder |
Toothing type | helical toothed |
Number of teeth | 69 pcs |
Ø outside | 95 mm |
Ø inside | 12.5 mm |
Puch spare part no. | 349.3.13.200.1 |
Suitable for the following models
Puch | Z50 (X30 Sport) |
Accessories & related products
HS-Retro bearing ring 24/32/7.5 large Z50 (1A quality) | Puch X30 NS, NL
Manufacturer: HS-Retro · Material: Steel · Surface: hardened & ground · Width: 7.55 mm · Ø inside: 23.8 mm · Ø outside: 31.98 mm · Area of application: High End · Area of application: Original · Puch spare part no.: 329.1.13.065.1
66,20 EUR
HS-Retro bearing race 19.4/28.1/7.5 small Z50 (1A quality) | Puch X30 NS, NL
Manufacturer: HS-Retro · Material: Steel · Surface: hardened & ground · Width: 7.5 mm · Ø inside: 19.44 mm · Ø outside: 28.1 mm · Area of application: High End · Area of application: Original · Puch spare part no.: 329.1.13.010.1
50,60 EUR
HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50
Manufacturer: HS-Retro · Material: Steel · Toothing type: helical toothed · Number of teeth: 19 pcs · Height: 26.6 mm · Ø inside: 17 mm · Ø outside: 74.8 mm · Area of application: High End · Area of application: Original · Puch spare part no.: 350.1.12.002.2
180,20 EUR
Moped fans like you also bought:
Airsal 46 mm cylinder kit straight exhaust | Puch
Manufacturer: Airsal · Material: Cast aluminum · Camouflaged: No · Surface: sandblasted · Crankshaft stroke: 43 mm · Nominal diameter: 46 mm · Number of fixing points: 4 pcs · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Area of application: Tuning
225,30 EUR
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Cast aluminum · Camouflaged: Yes · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 44 mm · Ø cylinder neck: 48 mm · Number of fixing points: 4 pcs · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Hole pattern [mm]: 44 x 44 · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Area of application: Tuning · Decompressor: Yes
95,70 EUR
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Number of components: 10 pcs · Ø outlet inside: 22 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Area of application: Standard
22,40 EUR
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Area of application: Standard · Decompressor: Yes
11,20 EUR
swiing® ingenious clutch spring reinforced +40% (Version 2.0) | Puch Z50
Spring design: Pressure spring · Ø wire: 4.5 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: red · Number of components: 1 pcs · Total length: 23.5 mm · Ø inside: 30 mm · Ø outside: 39 mm · Area of application: Tuning
26,80 EUR