For the economical repair of damaged or worn threads (of all materials) and as a design element for thread reinforcement when using materials with low shear strength (e.g. aluminum, aluminum-magnesium alloys). The use of wear-free HeliCoil thread inserts not only repairs the thread but also increases the thread load-bearing capacity.
Execution:
High-strength, free-running HeliCoil®plus thread inserts made of stainless steel with high wear resistance, low thread friction in tight tolerances, high surface strength as well as corrosion resistance and heat resistance. The flexible design enables even load and stress distribution and thus produces durable screw connections of the highest quality for all operating loads (static, dynamic) with ideal force transmission. Uncomplicated, quick assembly, creating an internal thread that is true to gauge and can be used on both sides.
Complete repair kit for M10x1 thread sizes in a plastic case.
Application:
1. Drill out the defective thread with the enclosed drill.
2. Check the tap and threaded bolt.
3. Cut the holding thread with the special HeliCoil tap.
4. Turn the thread insert into the holding thread using the installation tool.
5. Remove the tang with the tang breaker
Scope of delivery
- 1 pc. twist drill Ø10.2 mm
- 1 pc. Tap
- 1 pc. Installation tool
- 1 pc. Stud breaker
- 10 pcs. HeliCoil thread insert (1×D)
- 10 pcs. HeliCoil threaded insert (1.5×D)
- 10 pcs. HeliCoil threaded insert (2×D)
- 1 pc. Plastic case 180×165×45 mm (L×B×H)
Note
Adetailed instruction is included.
Original HeliCoil product from the German manufacturer Böllhoff.
Details
| Total length | 10 mm, 15 mm, 20 mm |
| Storage method | Suitcase |
| Manufacturer | HeliCoil |
| Material | Chrome steel (stainless steel) |
| Number of components | 30 pcs |
| Area of application | Workshop accessories |
| Thread type | MF10x1 (fine pitch thread) |
| Dimension thread insert | 1D, 1.5D, 2D |
| Ø bore | 10.2 mm |
| Nominal diameter (thread) | 10 mm |
| Dimension storage box | 180 x 165 x 45 mm |
Moped fans like you also bought:
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Ø inside: 4.8 mm · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Color: blue · Ø outside: 8.3 mm · Area of application: Tuning · Total length: 28 mm
20,20 EUR
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Number of components: 1 pcs · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Area of application: (Dis)assembly tool · Width across flats Screw: 19 mm · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8
11,20 EUR
GPO piston stopper M14x1.25
Manufacturer: GPO · Diameter: 12 mm · Diameter: 16 mm · Number of components: 1 pcs · Material: Steel · Surface: blue galvanized · Thread type: MF14x1.25 (fine pitch thread) · Area of application: Special tool · Width across flats SW: 17 mm · Total length: 83 mm
10,70 EUR
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Ø inside: 27 mm · Manufacturer: swiing® ingenious parts · Area of application: Special tool · Material: Steel · Surface: blue galvanized · Surface: rubberized · Diameter: 19 mm · Total length: 290 mm · Height: 80 mm · Ø outside: 93 mm · Thickness: 5 mm · Number of components: 1 pcs · Ø Pin: 8 mm
54,00 EUR
MBR clutch basket 18 teeth Racing straight | Puch E50
Ø inside: 15 mm · Ø inside: 17 mm · Manufacturer: MBR · Area of application: Tuning · Material: Steel · Recording type: Interlocking · Toothing type: straight toothed · Number of teeth: 18 pcs · Height: 49 mm · Ø outside: 99.5 mm · Ø Receptacle: 31 mm
208,40 EUR
Collection only possible with online purchase and appointment.
