Original pole wheel, suitable for various mopeds, mopeds and small motorcycles with mechanical breaker ignition and left-hand engine.
The magnetic flywheel can be used for two-speed engines, e.g. Puch X30 Sport, Puch X30 Velux with Z50 engine / Sachs 50, 502, 50/2, 50/3, 50/4, 503 / Zündapp Belmondo 247 etc.
This flywheel is a perfect replica of the original Bosch / Ducati flywheels. The rotor with steel core is perfectly balanced and is suitable for both original and tuned engines.
Weight: 900 grams
Ø inside: 91.1 mm
Ø outside: 116.5 mm
Version 2.0: Revised version of the previously offered flywheel with more precise threaded holes for the idler wheel and exact positioning of the breaker cam.
Matching attachments for the flywheel such as the ignition plate, breaker, condenser, ignition coil, ignition plug etc. can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Puch spare part number: 360.4.50.210.2 / 360.4.50.110.2
Original Sachs spare part number: A2600 / 0286 175 005
Original Zündapp spare part number: 265-07.923 / 265-07-916
Details
| Manufacturer | GPO |
| Material | Steel |
| Tension | 6 V |
| Thread type | MF26x1.5 (fine pitch thread) |
| Performance | 17 W |
| Direction of rotation | left |
| Height | 36.1 mm |
| Thread length | 8 mm |
| Ø cone small inside | 11.5 mm |
| Ø cone large inside | 15 mm |
| Ø Flywheel outside | 116.5 mm |
| Cone length | 18.5 mm |
| Ø Internal flywheel | 91.1 mm |
| Cone ratio | 1:5 |
| Weight | 900 g |
| Pony OEM number | A2600 |
| Sachs OEM no. | 0286 175 005 |
Suitable for the following models
| Puch | ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (with pedal shaft) - 1A (AT), 2A (HG) 535 |
| Zündapp Belmondo | |
| Tomos | A3 |
| DKW | |
| Hercules | |
| Kreidler | Flory MF Foil |
| Zündapp | 434 Chassis (mountaineer) 247 Motor 278 Motor |
| KTM | |
| Rixe |
Accessories & related products
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
10,20 EUR
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Area of application: (Dis)assembly tool · Number of components: 1 pcs · Strength class: 8.8
11,50 EUR
GPO ignition plate set 90 mm (Bosch, Ducati Replica)
Manufacturer: GPO · Material: Aluminum · Surface: dull · Color: gray · Tension: 6 V · Ø inside: 18.5 mm · Ø outside: 90 mm · Cable length: 400 mm · Cable length: 500 mm · Number of cables: 3 pcs · Ø bolt circle: 80 mm · Area of application: Original · Area of application: Standard · Number of fixing points: 4 pcs
87,30 EUR
BOSCH screw-in condenser | Bosch / Ducati
Manufacturer: BOSCH · Capacity: 0.2 µF · Thread type: M3x0.5 (standard thread) · Ø outside: 18 mm · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Height: 27 mm · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A2090 · BOSCH OEM number: 2 207 330 050 · Alternative version of the Sachs OEM number: 0265 052 003 · Pony OEM number: A2092 · Sachs OEM no.: 0265 052 007
23,20 EUR
BOSCH Breaker without cable reinforced | Bosch / Ducati
Manufacturer: BOSCH · Material: Steel · Cable available: No · Ø mounting hole: 4.5 mm · Ø Internal flywheel: 90 mm · Ø axle: 4 mm · Area of application: Tuning · Number of fixing points: 1 pcs · Alternative version of the Pony OEM number: A4606 · BOSCH OEM number: 1 217 013 020 · Alternative version of the Sachs OEM number: 0983 106 000 · BERU OEM number: 0 340 100 466
24,40 EUR
DUCATI ignition coil (1A quality)
Manufacturer: DUCATI · Ø cable holder: 5.9 mm · Mounting type: Screws · Hole spacing: 54 mm · Color: black · Place of use: Internal (in the ignition) · Total length: 76.5 mm · Cable length: 37 mm · Ø mounting hole: 4.6 mm · Height: 17 mm · Ø Internal flywheel: 90 mm · Area of application: Original · Area of application: Standard · Number of fixing points: 2 pcs · Alternative version of the Pony OEM number: A2116 · Alternative version of the Pony OEM number: A2118 · Alternative version of the Sachs OEM number: 0265 142 002 · Alternative version of the Sachs OEM number: 0265 142 004 · Pony OEM number: A2114 · Pony OEM number: A5524 · Sachs OEM no.: 0265 132 100 · Sachs OEM no.: 0265 203 001
75,60 EUR
swiing ignition plate set Bosch, Ducati (Version 2.0)
Manufacturer: swiing · Material: Aluminum · Color: gray · Tension: 6 V · Ø inside: 18.5 mm · Ø outside: 90 mm · Cable length: 450 mm · Cable length: 550 mm · Number of cables: 3 pcs · Ø bolt circle: 80 mm · Number of fixing points: 4 pcs · Alternative version of the Pony OEM number: A2656 · Alternative version of the Sachs OEM number: 0283 130 004 · Alternative version of the Sachs OEM number: 0286 254 008
128,10 EUR
Not in stock
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
10,20 EUR
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Area of application: (Dis)assembly tool · Number of components: 1 pcs · Strength class: 8.8
11,50 EUR
GPO ignition plate set 90 mm (Bosch, Ducati Replica)
Manufacturer: GPO · Material: Aluminum · Surface: dull · Color: gray · Tension: 6 V · Ø inside: 18.5 mm · Ø outside: 90 mm · Cable length: 400 mm · Cable length: 500 mm · Number of cables: 3 pcs · Ø bolt circle: 80 mm · Area of application: Original · Area of application: Standard · Number of fixing points: 4 pcs
87,30 EUR
swiing ignition plate set Bosch, Ducati (Version 2.0)
Manufacturer: swiing · Material: Aluminum · Color: gray · Tension: 6 V · Ø inside: 18.5 mm · Ø outside: 90 mm · Cable length: 450 mm · Cable length: 550 mm · Number of cables: 3 pcs · Ø bolt circle: 80 mm · Number of fixing points: 4 pcs · Alternative version of the Pony OEM number: A2656 · Alternative version of the Sachs OEM number: 0283 130 004 · Alternative version of the Sachs OEM number: 0286 254 008
128,10 EUR
Not in stock
Nut M10x1 SW14 Flywheel
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Thread type: MF10x1 (fine pitch thread) · Nut type: Flange nut · Ø outside: 18.8 mm · Height: 8.9 mm · Drive: External hexagon · Width across flats SW: 14 mm · Area of application: Standard · Pony OEM number: A4513 · Sachs OEM no.: 0942 072 102
2,80 EUR
Collection only possible with online purchase and appointment.
