Original reproduction air filter for your Puch Maxi S / N moped / moped.
The complete air filter box is supplied disassembled.
To make assembly easier, we recommend briefly placing the air filter housing in warm water to soften the plastic.
The complete air filter set includes the two housings, the mounting brackets, the air filter hose, the two air filter plugs and the air filter screen of your choice.
Carburettor connection diameter: 20 mm
Select the desired air filter screen in the selection field:
- Standard: original air filter screen
- Racing: screen with fewer filter layers for more air flow
- Tuning: two-layer filter mat for maximum air flow
Note: From the factory, a joint with silicone sealant was drawn around the seam of the original air filter after the two parts were joined in order to exclude the risk of air leakage. We recommend doing the same with this air filter.
A suitable sealant can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
The set includes the following fixed parts:
Details
| Manufacturer | GPO |
| Color | black |
| Filter type | Standard sieve, Racing screen, Foam |
| Ø Internal connection | 20 mm |
| Mounting type | Plug connection clamped |
| Camouflaged | Yes |
| Area of application | Standard, Tuning |
Suitable for the following models
| Puch | E50 |
Accessories & related products
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Ø cable: 5 mm · Ø cable: 7 mm · Pony spare part no.: A2099 · Sachs spare part no.: 0265 100 00
9,85 EUR
swiing nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5 · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64
17,90 EUR
swiing 15 mm carburetor set camouflaged | Puch E50
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Carburetor type: SRE · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Hole spacing inlet: 38 mm · Mounting type: Plug connection clamped · Mounting type: Stud bolts & nuts · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Area of application: Tuning · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
118,20 EUR
Tuning set 38 mm (with choice of exhaust) | Puch E50
Manufacturer: GPO · Manufacturer: NGK · Manufacturer: swiing · Manufacturer: swiing® ingenious parts · Manufacturer: swiing® revival parts · Area of application: Tuning · Displacement: 50 ccm · Ø piston pin (B): 12 mm · Nominal diameter: 38 mm · Outlet type: straight · Camouflaged: Yes
349,30 EUR
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Contents [ml]: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm · Area of application: Chemistry
22,40 EUR
320,00 EUR/l
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: blue galvanized · Number of components: 1 pcs
3,15 EUR
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Area of application: Gearbox lubrication with clutch · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
11,20 EUR
24,89 EUR/l
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: blue galvanized · Surface: raw · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Color: silver · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm
14,50 EUR
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Material: Aluminum · Area of application: Tuning · Nominal diameter: 15 mm · Carburetor type: SRE · Mounting type: Plug connection clamped · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Total length: 66 mm · Mixed oil connection: No · Width: 50 mm · Vacuum connection: No · Height: 95 mm · Choke control: Hand choke · Nozzle thread: M3.5 · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
90,10 EUR
Hot
swiing® ingenious 15 mm intake manifold camouflaged (Version 2.0) | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Total length: 46 mm · Ø inside: 15 mm · Hole spacing inlet: 38 mm · Height flange center hole: 43 mm · Total height: 53 mm · Mounting type: Screws · Ø External connection: 20 mm · Camouflaged: Yes · Area of application: Tuning · Number of fixing points: 2 pcs
39,30 EUR
Collection only possible with online purchase and appointment.
