Racing kit with 44 mm diameter for your Tomos moped / moped with A35 engine.
This 65 cc nikasil-coated racing cylinder made of aluminum convinces with its good workmanship and long service life.
To get the full power out of the tuning cylinder, a racing exhaust and a carburettor with plenty of oomph should be fitted.
The scope of delivery includes all necessary gaskets, piston pins, piston rings and circlips.
You can find the necessary racing equipment and other engine kits in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Nominal diameter | 44 mm |
| Manufacturer | GPO |
| Material | Aluminum |
| Surface | sandblasted |
| Displacement | 65 ccm |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 47.8 mm |
| Ø outlet inside | 22.8 mm |
| Hole spacing inlet | 36 mm, 39 mm |
| Inlet window | 35.5 x 29.5 |
| Thread inlet | M5x0.8 (standard thread) |
| Area of application | Tuning |
| Number of fixing points | 4 pcs |
| Ø piston pin (B) | 12 mm |
| Hole pattern [mm] | 44 x 44 |
| Outlet type | slanted |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Decompressor | No |
| Camouflaged | No |
Suitable for the following models
| Tomos |
Accessories & related products
GPO piston 44 mm (12 mm KoBo) | Tomos A3/A35
Nominal diameter: 44 mm · Manufacturer: GPO · Ø outside piston (A): 43.96 mm · Compression height (C): 21.9 mm · Curvature (D): 4.15 mm · Total piston height (E): 49.55 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston ring height: 1.5 mm
44,30 EUR
Moped fans like you also bought:
Dell'Orto 16/16 SHA carburetor hand choke
Manufacturer: Dell'Orto · Component group Carburetor: Carburetor complete · Material: Aluminum · Color: black · Nominal diameter: 16 mm · Width: 72 mm · Carburetor type: SHA · Height: 111 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 21 mm · Nozzle size: 82 · Ø Inside entrance: 16 mm · Ø Internal connection: 19 mm · Total length: 82 mm · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Mounting type: Plug connection clamped · Camouflaged: No · Area of application: Tuning
81,70 EUR
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Total length: 8 mm · Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
24,40 EUR
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Thickness: 3 mm · Place of use: Exhaust · Area of application: Tuning · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm
8,65 EUR
Collection only possible with online purchase and appointment.
